Manual - Surveillance System, Security Cameras, and CCTV ...

66
1.8.1 Video Schedule
1. Set your surveillance preferences:
[Time] Enter the starting and ending time of the schedule.
[Monitor Invoke] Sets alert methods on motion detection.
� Rec: Records while monitoring. Select the recording mode to be Motion Detection or
Round-the-Clock.
� Pager/E-Mail: Sends pager or e-mail alerts on motion detection.
� Output: Triggers the corresponding I/O devices on motion detection. To set up I/O devices,
see Adjusting Individual Camera earlier in this chapter.
[Remote] Allows remotely accessing live video from the WebCam server on the scheduled time.
[Week Days Enable Schedule] Select days for the schedule.
[Camera] Applies the settings to selected cameras.
2. Click the Add Schedule tab to apply above settings. The set schedule will be displayed on the
Schedule List Window.
3. Repeat above steps to set up more schedules.
Clicking separate Camera tabs, you will see the set schedule is displayed in different color bars:
� Red: Recording enabled.
� Green: Pager/E-mail notification enabled.
� Blue: Live view from the WebCam server accessible.
� Jade: I/O monitor enabled.
� Purple: Center V2 schedule enabled.
To modify a schedule, highlight the desired schedule in the Schedule List window, and then click the
Modify Schedule button to make changes.
To delete a schedule, highlight the desired schedule in the Schedule List window, and the press the
Delete key on the keyboard.