Manual - Surveillance System, Security Cameras, and CCTV ...

158
3.4.1 Object Counting
To define the counter to count target objects, click the Counter tab.
Figure 3-18
1. In the Choose Camera section, select a camera from the drop-down list for setup
2. Select Enable Setting.
� Define Detection Zones: Select this option and use the mouse to draw lines on the camera
image to mark the boundaries of detection zones.
This button is used to switch the direction and scheme of counting. Click this
button to add green or red arrows or both.
The red arrow indicates an in direction. When an object appears in the
camera view and moves along the direction of the red arrow, it will be
counted as 1 in.
The green arrow indicates an out direction. When an object appears in the
camera view and moves along the direction of the green arrow, it will be
counted as 1 out.
Click this button to switch to another line and then use button to delete or
the button to edit.
Click this button to delete the line.
� Define Object Size: Select this option and click the button to pause live images. Use
the mouse to outline a region matching the normal size of the targeted object.