Manual - Surveillance System, Security Cameras, and CCTV ...

1.19.2 Touch Screen Panel
The touch screen panel allows you to switch to ViewLog and full screen by the touch of a finger. To
open the panel, follow the steps below:
1. Click the Configure button (No. 14, Figure 1-2), point to Tools, select Tool Kit, point to Touch
Screen Panel and then select Panel Setup to display the following window.
Figure 1-89
[Activate]
� Activate when enter Full-Screen Mode only: Launches automatically the panel when the
full screen view is applied.
� Always Active: Always displays the panel on the screen.
[Layout] Choose a vertical or horizontal panel.
1
Configuring Main System
2. Click OK to save the above settings.
3. An information window indicating date, time, and storage space will appear at the upper left corner
of the screen. Right-click it to open the touch panel as shown below.
2
1 3 4 5 6
Figure 1-90
No. Name Description
1 Indicator Indicates date, time and storage space.
2 ViewLog Opens the ViewLog.
3 Full Screen Switches to a full screen.
4 Login / Change User Switches users to log in the GV-System.
107