Manual - Surveillance System, Security Cameras, and CCTV ...

8.6.9 PTZ Control
1. Select a PTZ capable camera from the monitoring window, or double-click it on the Host List
(Figure 8-35).
2. Click the PTZ Control button (No. 5, Figure 8-34).
3. Turn the switch to the ON position.
4. Use the directional, zoom-in, zoom-out, focus-in, focus-out buttons to control the PTZ camera.
The Timer has the same functions as the one in the Single View Viewer. The supervisor is given the
highest priority to control PTZ in Multi View and won’t be restrained by 60-second time limit. When the
supervisor logs in Multi View, the Timer will show 999.
The Option button lets you direct the PTZ camera to a preset position and configure the speed of the
PTZ camera up to five levels.
Switch
Timer
Figure 8-40 PTZ control panel
Option
8
Remote Viewing
405