Manual - Surveillance System, Security Cameras, and CCTV ...

56
1.6.3 Auto Start Recording
If the administrator does not press the mouse or press a key within a set period of time, the system will
automatically start recording.
1. In the System Idle Protection dialog box (Figure 1-39), select the Auto Monitoring option, and
select Monitoring All, Schedule Monitoring or I/O Monitoring from the drop-down list.
2. In the System Idle Over field, enter the idle time from 10 to 300 seconds, after which the system
will start recording.
Note: The feature can monitor keystrokes or mouse clicks, even from IR Remote Control and
GV-Keyboard.