Manual - Surveillance System, Security Cameras, and CCTV ...

4.3.1 Filter Settings
You can define filter criteria to search the desired log data. You can also import pre-defined filter
settings for log search, or save current filter settings for future use.
4
Playing Back Video Files
1. On the toolbar, click the desired log table button (Monitor, System, Login, Counter or POS), click
the Filter button (No. 3, Figure 4-30), and select Default Filter. This dialog box appears.
Figure 4-31
3. Define the filter criteria, such as a specific camera and a period of time.
4. If you want to search the log data recorded during the Daylight Saving Time period, select DST
Rollback.
5. You can click Export to save the current settings to another location, or Import to apply other filter
settings.
6. Click OK to display the filter results.
Tip: Next time when you want to use the same exported settings, just click the Filter button, select
Favorites, and select the name of the export file.
Note:
1. The Import and Export features are only available in version 8.1 or later, therefore it is not
applicable to export the filter settings to the older version of GV-System.
2. The default Export path is :\GV folder\Syslog_Favorites\Monitor. If you change the saving path,
the name of the export file will not be listed in the Favorites option.
245