Owner's Instructions - Abt

Picture Control
Using Automatic Picture Settings
Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory.
You can activate either Dynamic, Standard, Movie by making a selection from the menu.
1. Press the MENU button to display the menu.
Press the ENTER button, to select “Picture”.
TV
Picture
Mode : Dynamic ►
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Backlight 10
▼More
Move Enter Return
2. Press the ENTER button to select "Mode".
Press the ▲ or ▼ button to select the "Dynamic", "Standard", "Movie" picture
setting. Press the ENTER button.
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie for a natural Image without picture enhancements.
TV
Picture
Mode
: Dynamic
Contrast Standard 100
Brightness Movie 45
Sharpness 75
Color 55
Tint G 50 R 50
Backlight 10
▼More
Move Enter Return
3. Press the ▲ or ▼ button to select "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", then press the ENTER button.
4. Press the ◄ or ► button to decrease or increase the value of a particular item.
For example, if you select "Contrast", pressing the ► button increases it.
Press the ENTER button.
Press the EXIT button to exit.
When you make changes to "Contrast", "Brightness", "Sharpness",
"Color", "Tint(G/R)" or "Backlight", the OSD will be adjusted accordingly.
When in PC mode, Tint, Sharpness and Color are not available.
Each adjusted setting will be stored separately according to its input mode.
TV
Picture
Mode : Dynamic ►
Contrast 100
Brightness 45
Sharpness 75
Color 55
Tint G 50 R 50
Backlight 10
▼More
Move Enter Return
▲
Contrast
▼
100
Move Adjust Return
Press the P.MODE button on the remote control repeatedly to select the desired
picture mode.
English - 23