Toyota Toyota Touch & Go - PZ490-00331-*0 - Toyota Touch & Go - Toyota Touch & Go Plus - English - mode d'emploi

Touch_Go_Plus_OM20B71E.book Page 114 Thursday, September 20, 2012 12:03 PM
1. AUDIO SYSTEM OPERATION
5. USB MEMORY/iPod OPERATION
The system enables users to enjoy
music played from a USB memory or
iPod on the vehicle's speakers.
CAUTION
● Do not operate the player’s controls or
connect the USB memory or iPod while
driving.
CONNECTING A USB
MEMORY OR iPod
1 Open the cover of the USB/AUX port
and connect a USB memory or iPod
using an iPod cable.
NOTICE
● Do not leave your portable player in the
vehicle. The temperature inside may rise
to a level that could damage the portable
player.
● Do not press down on or apply unnecessary
pressure to the portable player
while it is connected as this may damage
the portable player or its terminal.
● Do not insert foreign objects into the
USB port as this may damage the portable
player or its terminal.
INFORMATION
● This system has a charging function for
iPods.
● When the battery level of an iPod is very
low, the iPod may not operate. If so,
charge the iPod before use.
● Depending on the portable player that is
connected to the system, certain functions
may not be available. If a function
is unavailable due to a malfunction, disconnecting
your portable player and
reconnecting it may resolve the problem.
● When an iPod does not operate, update
the software of the iPod to the latest version,
and then retry. For supported models
and software versions, see page
135.
● This system supports MTP devices.
• The USB/AUX port is located on the
instrument panel, or in the console box or
glove box etc. The location and design are
different depending on the vehicle. For
details, see the Pictorial index of “Owner’s
Manual”.
• Turn on the power of the USB memory or
iPod if it is not turned on.
• If a USB memory or iPod is inserted, it
starts playing automatically. As soon as it
is ready to play, the audio control screen is
shown automatically.
114
Display audio_Ext_EE