Toyota Toyota Touch & Go - PZ490-00331-*0 - Toyota Touch & Go - Toyota Touch & Go Plus - English - mode d'emploi

Touch_Go_Plus_OM20B71E.book Page 153 Thursday, September 20, 2012 12:03 PM
1. BASIC INFORMATION BEFORE OPERATION
3. CONNECTING A Bluetooth ® PHONE
CONNECTING A Bluetooth ®
PHONE
In order to use the hands-free system,
it is necessary to pair the phone and
connect the phone’s profile (HFP) with
the system. (In this manual, pairing refers
to a Bluetooth ® device connecting
with the system. Connecting refers to
the paired device’s profile(s) being
connected to the system.)
Once the profile has been connected,
hands-free calls can be made.
If you have not yet connected any
Bluetooth ® phones with phone profile
(HFP), you must first connect your
phone with phone profile (HFP)
according to the following procedure.
Connect your Bluetooth ® phone with
phone profile (HFP) after bringing the
vehicle to a complete stop.
• See “Bluetooth ® SETTINGS” on page
193 of additional registration when registering.
CONNECTING A Bluetooth ®
PHONE
■CONNECTING FROM THE SYSTEM
1 Press the button.
2 Touch “Bluetooth ∗ Setup”.
3 Touch “Search for Bluetooth ∗ devices”.
5
Bluetooth ® HANDS-FREE SYSTEM
• When a Bluetooth ® device is currently
connected, a pop-up window is displayed.
To disconnect it, touch “Yes”.
∗ : Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
153
Display audio_Ext_EE