Toyota Toyota Touch & Go - PZ490-00331-*0 - Toyota Touch & Go - Toyota Touch & Go Plus - English - mode d'emploi

Touch_Go_Plus_OM20B71E.book Page 59 Thursday, September 20, 2012 12:03 PM
4. MY DESTINATIONS
REGISTERING FROM AN
EXTERNAL DEVICE
“CSI” formatted data can be transferred
from a USB memory to this system.
Transferred addresses and
numbers will be stored in the “Stored”
list on the “My destinations” screen and
“Contacts” screen. (See pages 55 and
157.)
■LOADING ADDRESSES VIA A USB
MEMORY
1 Open the cover of the USB/AUX port
and connect a USB memory.
3 Touch “Enter destination”.
• The “Enter destination” screen can be displayed
by touching on any of the
“Navigation” screens.
4 Touch “Advanced” on the “Enter destination”
screen.
5 Touch “Load contacts from USB”.
2
NAVIGATION SYSTEM
• The USB/AUX port is located on the
instrument panel, or in the console box or
glove box etc. The location and design are
different depending on the vehicle. For
details, see the Pictorial index of “Owner’s
Manual”.
2 Touch “NAV” on the map or press the
“MAP NAV” button to display the
“Navigation” menu screen.
• If the “Navigation” menu screen is not displayed,
touch
until it is displayed.
6 The following screen will be displayed
while loading the data.
• To cancel this function, touch “Cancel”.
59
Display audio_Ext_EE