Samsung CLX-3305FW - User Manual_55.27 MB, pdf, ENGLISH

Wireless network setup
Even if your computer is running Windows 7 or higher, you cannot use this
feature if your PC does not support wireless network. Set the wireless
network using a USB cable (see "Access point via USB cable" on page 169).
Ad hoc via USB cable
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
If below screen appears, press the
panel within 2 minutes.
(WPS) button from the control
Items to prepare
• Network-connected computer
• Software CD that was provided with your machine
• A machine installed with a wireless network interface
• USB cable
When the wireless network set up is completed, click Next.
7
Follow the instructions in the installation window.
8
2. Using a Network-Connected Machine
175