Samsung SF-3100I - User Manual_2.42 MB, pdf, ENGLISH

The Fax Machine
Receiving in FAX
Mode
Before receiving in FAX Mode, you have to set the machine to
FAX Mode by pressing Rcv. Mode/Contrast repeatedly until
‘❿FAX MODE’ is displayed.
•In Standby Mode, FAX appears in the right hand corner
of the display.
•When you get a call, the machine answers after the
second ring, and receives the fax automatically. When
reception is complete, the machine returns to Standby
Mode.
•If you want to change the ‘Rings to Answer option’,
see “System Setup Options” on page 6-8.
Receiving in TEL
Mode
Before receiving in TEL Mode, you have to set the machine to
TEL Mode by pressing Rcv. Mode/Contrast repeatedly until
‘❿TEL MODE’ is displayed.
In Standby Mode, TEL appears in the right hand corner of the
display.
1 Pick up the handset and answer it when the
telephone rings.
•If your machine is an SF-3100T, and you do not
answer the call within about 13 rings, the TAM OGM
will be played.
2 Press Start/Enter if you hear a fax tone, or if the
person on the other end asks you to receive a
document.
Chapter 3
•Be sure there is no document loaded, or, the document
will be sent to the caller’s fax showing ‘TX’ in the display.
3 Hang up the handset.
•Your machine starts to receive.
3-7