Ergebnisse und Diskussion Inconel 706 (<strong>Ni</strong>-Rest; Co-0,05%; Cr-15,65%; Ti-1,54%; Al-0,26%; <strong>Fe</strong>-37,05%; Nb-2,98%; C-0,008%; B-0,0005% in Mass%) γ-Matrix γ’-Phase γ’’-Phase η-Phase <strong>Ni</strong> 34,85 40,01 76,58 84,23 65,68 67,65 76,9 78,62 Co 6,2x10 -2 0,05 1x10 -3 0,14 3,9x10 -3 0,078 8,8x10 -4 - <strong>Fe</strong> 45,56 50,16 9,34 - 1,5x10 -4 - 1,2x10 -3 - Cr 19,53 9,77 7,79x10 -2 0,32 5,3x10 -5 6x10 -3 4,8x10 -4 - Ti 1,4x10 -12 5,16x10 -5 1,46 4,19 0,11 3,68 18,55 21,38 Al 1,6x10 -5 5,9x10 -14 4,22 10,13 0,1 1,56x10 -4 1,3x10 -2 2,45x10 -8 Nb 3,0x10 -11 1,09x10 -8 8,32 0,98 34,1 28,58 4,53 4,51x10 -3 C 6,1x10 -15 1,8x10 -7 0 - 0 - 0 - B 6,2x10 -4 6,77x10 -4 0 - 0 - 0 - Phasenanteil [Mass%] Solvustemperatur [°C] 80,9 80,9 5,99 2,57 6,05 11,08 7,79 5,45 - - 227 805 827 742,9 1002 965,3 DT 706 (<strong>Ni</strong>-Rest; Cr-17,7%; Ti-1,93%; Al-0,55%; <strong>Fe</strong>-22,2%; Nb-3,0%; C-0,01%; in Mass%) γ-Matrix γ’-Phase γ’’-Phase η-Phase <strong>Ni</strong> 49,03 55,82 77,69 80,32 65,55 67,73 76,90 78,62 <strong>Fe</strong> 28,36 32,31 1,4x10 -2 - 3,8x10 -5 - 3,5x10 -4 - Cr 22,61 11,88 2,3x10 -2 0,31 3,4x10 -5 6x10 -3 2,9x10 -3 - Ti 3,5x10 -11 7x10 -5 6,76 5,37 0,13 3,68 18,58 21,38 Al 3,2x10 -6 9,4x10 -14 5,03 7,26 5,8x10 -3 3,1x10 -4 5,1x10 -4 2,9x10 -8 Nb 3,3x10 -9 8,7x10 -9 10,48 6,75 34,31 28,58 4,52 2,7x10 -3 C 4,3x10 -13 2,2x10 -7 Phasen- 0 - 0 - 0 - anteil [Mass%] Solvustem- 78,28 76,64 10,92 7,58 4,33 9,4 6,38 6,38 peratur [°C] - - 867 848 667 769 1017 905 Tabelle 4.4: Phasenanteile and -zusammensetzungen <strong>von</strong> Inconel 706 und DT 706 bei Raumtemperatur berechnet, mittels Thermo-Calc und Phascalc (blauer Hintergrund) 63
Ergebnisse und Diskussion 750 °C 750 °C Abbildung 4.22: Phasenanteile in Inconel 706 (volle Linie) und DT 706 (Strichlinie), abhängig <strong>von</strong> Temperatur, berechnet mittels Thermo-Calc und Phascalc. 64