Fachzeitschrift_OeGS_03_04_2019

Experience in an Advanced 9%CrMoCoVNbNB Alloy for
Ultra-Supercritical Steam Turbine Rotor Forgings and
Castings, Journal of Engineering for Gas Turbines and
Power June 2013, Vol. 135
[7] R. Hanus: Heavy steel castings for AUSC-power plants
process-development and experience for materials
C91, C911, CB2 and Alloy 625 for heavy walled cast
components; Proceedings of the 7th International Conference
on Creep, Fatigue and Creep-Fatigue Interaction
(CF-7), Indira Ghandi Centre for Atomic Research,
Kalpokham, Tamil Nadu, India, January 19-22 (2016), P.
27-34
[8] R. Hanus, E. Aistleitner, H. Schwarz: „Die größte Dampfturbine
der Welt“. Großkomponenten aus Stahlguss für
thermische Kraftwerke. Design, Werkstoffe, Prozesse,
Qualitätssicherung. In: Giesserei-Rundschau 54 (2007),
Heft 11/12, S. 210-215
[9] R. Hanus, A, Buberl: Ein neuer Stahlguss-Werkstoff wird
geboren – Von der Idee über die Forschung zu Pilotkomponenten
und zur kommerziellen Produktion von
Großkomponenten, In: GießereiRundschau 52 (2005),
Heft 5/6, S. 118-123.
[10] M. Kappler: Entwicklung von Kobalt-Bor-legierten Gusswerkstoffen,
Giesserei 101 08/2014, S. 62-65
[11] D. W. Meyer: Flux-cored Arc Welding, ASM Handbook,
Volume 6: Welding, Brazing and Soldering, 1993,
pp.186 - 189
[12] H. Schabereiter, R. Dörfler, J. Ziegerhofer: Einsparungspotentiale
bei der schweißtechnischen Fertigung chemisch
beständiger Anlagen durch den Einsatz von Fülldrahtelektroden,
Schweiß- & Prüftechnik 04/2000, S. 51 – 57
[13] M. Stemvers: The advantages of cored wires welding in
the fabrication of ship structures, Welding in Shipbuilding,
DVS-Berichte 195, 1998, S. 43 - 51
[14] E. Brauné, H. Cerjak, St. Caminada, C. Jochum, P. Mayr,
J. Pasternak: Weldability and Properties of new Creep
Resistant Materials for use in Ultra Supercritical coal
fired Power Plants, Materials for Advanced Power Engineering
2006, Proceedings Part II, pp. 871-891
[15] S. Baumgartner, G. Posch, P. Mayr: Welding advanced
martensitic creep-resistant steels with boron containing
filler metal, Welding in the World 56 (2012), No.
7/8, pp. 2-9
[16] Produktdatenblatt Böhler CB 2 Ti-FD:
http://www.vabw-service.com/voestalpine/
[17] L. Chen, K. Yamashita: Effects of PWHT Temperature on
Mechanical Properties of High-Cr Ferritic Heat-Resistant
Steel Weld Metal, Welding in the World 56 (2012),
No. 1-2, pp. 81-91
[18] K. Kimura, K. Sawada, H. Kushima and Y. Toda: Microstructural
Stability and Long-term Creep Strength of
Grade 91 Steel, Energy Materials: Materials Science
and Engineering for Energy Systems, Vol. 4, No. 4 , 8th
Charles Parsons Turbine Conference 2011, pp. 176-183
[19] S. Baumgartner, M. Schuler, R. Schnitzer and N. Enzinger,
Influence of Nickel on the Mechanical Properties of
a CB2 Flux Cored Wire Weld Metal, Proceedings of the
10th Liège Conference: Materials for Advanced Power
Engineering 2014, pp. 171-179
[20] M. Schuler, C. Ramskogler, S. Baumgartner, R. Schnitzer,
N. Enzinger: Simulation of Microstructure and Modelling
of Mechanical Properties of CB2 Flux Cored Wires
Weld Metal, Proceedings of the 10th Liège Conference:
Materials for Advanced Power Engineering, 2014, pp.
189-198
[21] K. Kimura, K. Sawada, H. Kushima, Y. Toda: Influence of
Chemical Composition and Heat Treatment on Longterm
Creep Strength of Grade 91 Steel, Procedia Engineering
55 (2013), pp. 2-9
[22] S. Baumgartner, A. Holy, M. Schuler, A. Sarić, R. Schnitzer,
N. Enzinger, Properties of a creep resistant 9Cr-
1.5Mo-1Co cast steel joint welded with a matching fluxcored
wire, Welding in the World 58 (2014), No. 4, pp
565-575
[23] M. Schuler, S. Baumgartner, R. Schnitzer, N. Enzinger,
Creep investigation of CB2 joints using similar rutile
CB2-flux cored wire, IIW Doc. II-1850-13
[24] S. Baumgartner, H. Pahr, T. Zauchner, Creep strength of
CB2 flux cored wire weld metal, Proceedings of the 4th
International ECCC Creep & Fracture Conference 2017
[25] S. Baumgartner, H. Pahr, T. Zauchner, Investigation on a
creep-tested CB2 steel cross-weld sample welded with
a matching flux-cored wire, Welding in the World 62
(2018), No. 4, pp 811-817
[26] C. Lochbichler, E. Schmidtne-Kelity, S. Baumgartner,
Latest Developments of Cast Materials and Welding
Consumables for Coal-fired Steam Turbines Components
/ Nickel-base Alloy A625 and CB2 Steel for the A-USC
Technology, Proceedings of PowerGen 2013, Vienna •
Die Autorin
Mag. Dipl. Ing. Dr. Susanne
Baumgartner ist als Senior
Expert für warmfeste
Schweißzusätze im Bereich
Forschung und Entwicklung
der voestalpine Böhler
Welding Austria tätig.
Sie studierte Wirtschaftsingenieurwesen
Maschinenbau
an der TU Graz und
absolvierte dort die Ausbildung
zum International
Welding Engineer.
SCHWEISS- und PRÜFTECHNIK 03-04/2019 47