Axial innen engl - TLT Turbo GmbH

More documents

Recommendations

Info

Am Weinberg 68 · D-36251 Bad Hersfeld/Germany Phone: +49.6621.950-0 · Fax: +49.6621.950-100 AXN SERIES with outlet Guide Vanes Technical Description High output and broad operationg poing adaptability are key features of all fans of this series. ■ 21 available design sizes with casing diameters from 250 to 2500 mm ■ Two basic designs for direct drive (M) or belt drive (R). ■ From optimum pressure coefficiets this series is equipped with outlet guide vanes. ■ impeller blades are steplessly pitch-adjustable without having to remove the impeller from the unit. Post-installation adjustments to specific operating points within the motor output range can thus be easily made. ■ Impellers can be supplied with 12, 9, 8, 6 or 4 blades (important particularly for direct-driven fans). ■ The impeller material is cast solumin, with the exception of the clamping strap which consists fo AlMg 3F-2. A high weather and seawater resistance is thus ensured. ■ On R1 and R2 (belt driven) types, an additional operatiin point matching feature is available via the “stepless“ impeller rpm adjustment which can be achieved by changing the belt transmission ratio. ■ High pressure coefficients permit low tip speeds for minimum operating noise. ■ Efficiencies up to 82% ■ Tip speeds up to 85 m/s ■ Direct-driven fans are normally supplied as airflow direction “D“ (outlet over motor) designs. In special cases, airflow direction “S“ Unless special precautions are taken, these axial-flow fans are not suitable for outdoor installation (enquiries to be directed to our headquarters). AXIAL FLOW FANS AXO SERIES - WITHOUT GUIDE VANES AXN SERIES - WITH OUTLET GUIDE VANES TECHNICAL DESCRIPTION (inlet over motor) types are available. The dimensioning for airflow direction “S“ axial-flow fans is done by our field representatives or at our company headquarters. ■ Their compact design allows these fans to be installed even where space is at a premium. ■ All fans are powered by IEC standard motors. Motors with thermocouples or thermistor sensors are available upon request. ■ Standard units are rated for up to 80°C, depending on motor insulation class. ■ Casings up to size 1250 are made of deep-drawing grade sheet steel with pressed flanges. ■ Fans up to size 1205 are surface-finished with a RAL 7030 (pebblegrey) polyester powder coating. As of size 1400, fans are supplied finispainted in RAL 7030 (pebble-grey) colour. AXO Series without Guid Vanes Technical Description 006 ■ 7 design size with casing diameters from 315 to 1120 mm. ■ Available as type “M“ for direct drive. ■ Not designed for subsequent impeller blade adjustment. ■ Built with 5, 8, 9 or 12 blades, depending on specified output ■ Aluminium impeller hub with plastic blades. ■ Up to 68% efficiency. ■ Tip speeds up to 82 m/s ■ Direct-driven fans are normally supplied as airflow direction “D“ (outlet over motor) designs. In special cases, airflow direction “S“ (inlet over motor) types are available. The demensionins ofor airflow directions “S“ axial-flow fans is done by our field representatives or at company headquarters. ■ Their compact design allows these fans to be installed even where space is at a premium. ■ All fans are powered by IEC standard motors. Motors with thermocouples or thermisotor sensors are available upon request. ■ Standard units are rated for up to 60°C, depending on motor insulation class ■ Casings up to size 1120 are made of deep-drawing grade sheet steel with pressed flanges. ■ Units are surface-finished with a RAL 7030 (pebble-grey) polyester powder coatching. For planning and installation, please also refer to our Installation, Operating and Maintenance Instructions (MBW).
Am Weinberg 68 · D-36251 Bad Hersfeld/Germany Phone: +49.6621.950-0 · Fax: +49.6621.950-100 Ø k Ø k � For vibration-damped installation an extension casing will be required with certain fan sizes. L M max. � Motorsize Size Type B 3 L AXIAL FLOW FANS AXO SERIES DIRECT DRIVE MAIN DIMENSIONS TYPE M-D and M-S Type M-D � (airflow direction: outlet over motor) � Sizes 400 - 1120 are available for „anticlockwise“ rotation (viewed in airflow direction) only. � Type M-S (airflow direction: intake over motor) by request 007 Important! This fan series is available only with the motor outputs stated in our price lists. Dimensions in mm Dimensional and design changes reserved. For planning and installation please also refer to our Installation, Operating and Maintenance Instructions (MBW). z x d Design with duct extension or long duct z x d Ø i.d. Ø k Ø D z x d L � ø i.d. ØD � ø i.d. ØD M max. Weight [kg] without Motor 315 71 - 80 320 356 386 8 x 9,5 150 265 6,0 400 71 - 90 100 401 438 468 12 x 9,5 188 376 348 390 11 16 500 80 - 100 90 - 132 504 541 571 12 x 9,5 225 450 570 451 16 22 630 90 - 112 132 634 674 712 16 x 11,5 286 572 595 575 30 39 800 100 - 132 160 797 837 875 24 x 11,5 350 700 760 810 50 70 1000 132 - 180 200 1003 1043 1081 24 x 11,5 415 830 730 770 85 105 1120 132 - 200 1124 1174 1214 24 x 11,5 450 825 110 1250 160 - 225 250 - 280 1261 1311 1351 24 x 11,5 500 1000 1400 180 - 225 250 - 315 1415 1465 1545 24 x 11,5 560 1120 1600 180 - 225 250 - 315 1587 1637 1717 32 x 11,5 560 1120 by request
Page 1 and 2: Ventilation Axial Flow Fans ▲ AXO
Page 3 and 4: Am Weinberg 68 · D-36251 Bad Hersf
Page 5: Am Weinberg 68 · D-36251 Bad Hersf
Page 29 and 30: 01.01 Am Weinberg 68 · D-36251 Bad
Page 33 and 34: 01.01 Am Weinberg 68 · D-36251 Bad
Page 39: 01.01 Am Weinberg 68 · D-36251 Bad
Page 56 and 57:
Am Weinberg 68 · D-36251 Bad Hersf
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Item Nr. Qty. Description Options:
Page 82 and 83:
Item Nr. Qty. Description or or - 0
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Item Nr. Qty. Description or or or
Page 134 and 135:
Item Nr. Qty. Description or or or
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160:
TLT-Turbo GmbH Building and Tunnel
show all

Axial innen engl - TLT Turbo GmbH

Create successful ePaper yourself

Delete template?

Save as template?