Packaged Gas/Electric Rooftop Units - Trane

52
Performance
Data
(8½ Ton)
Standard Efficiency
Table PD-46 — Belt Drive Evaporator Fan Performance — 8½ Ton — YSC102A3,A4,AW, AK *L,M — Low and Medium Heat —DownflowAirflow
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Field Supplied
Low Static Drive (1)
2-HP Standard Motor & Drive
2720 — — — — 608 0.59 649 0.70 689 0.82 728 0.94 764 1.06 798 1.19 829 1.33 859 1.46
3060 — — 615 0.65 654 0.75 692 0.87 728 0.99 764 1.13 799 1.26 833 1.39 864 1.53 894 1.68
3400 625 0.72 665 0.83 702 0.95 736 1.06 770 1.19 804 1.34 836 1.49 868 1.63 899 1.78 928 1.93
3740 681 0.93 716 1.05 752 1.18 784 1.31 815 1.44 846 1.58 876 1.74 906 1.90 935 2.06 963 2.22
4080 737 1.19 769 1.31 802 1.45 833 1.60 862 1.73 891 1.87 919 2.03 947 2.20 974 2.37 1001 2.55
Table PD-46 — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Drive 3-HP Oversized Motor & Drive
2720 888 1.61 916 1.76 943 1.91 970 2.07 996 2.22 1021 2.37 1046 2.53 1071 2.69 1096 2.86 1119 3.02
3060 922 1.82 949 1.98 976 2.14 1001 2.31 1026 2.47 1051 2.65 1074 2.81 1098 2.99 1120 3.16 1144 3.34
3400 957 2.08 984 2.24 1011 2.41 1035 2.58 1060 2.75 1083 2.93 1106 3.11 1128 3.29 — — — —
3740 992 2.39 1018 2.55 1045 2.72 1070 2.90 1095 3.08 1117 3.25 1140 3.44 — — — — — —
4080 1028 2.73 1053 2.90 1079 3.07 1104 3.26 1128 3.44 — — — — — — — — — —
For Standard Evaporator Fan Speed (RPM), reference Table PD-86.
Notes:
Data includes pressure drop due to standard filters and wet coils.
No accessories or options are included in pressure drop data.
Refer to Table PD-89 to determine additional static pressure drop due to other options/accessories
2-HP Fan Motor Heat (MBH) = 2.000 x Fan BHP+.5000.
3-HP Fan Motor Heat (MBH) = 2.900 x Fan BHP+.4750.
1. Field Supplied Fan Sheave AK79 and Belt AX38 required.
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.
Table PD-47 — Belt Drive Evaporator Fan Performance — 8½ Ton — YSC102A3,A4,AW, AK *H— High Heat —Downflow Airflow
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Field Supplied
Low Static Drive (1)
2-HP Standard Motor & Drive
2720 — — — — 619 0.62 661 0.74 700 0.85 738 0.97 773 1.09 807 1.23 838 1.36 868 1.51
3060 586 0.58 629 0.68 667 0.79 705 0.91 741 1.04 776 1.17 810 1.30 843 1.44 874 1.58 904 1.72
3400 642 0.76 681 0.88 717 1.00 751 1.12 785 1.25 817 1.40 849 1.55 881 1.69 911 1.84 940 1.99
3740 698 0.99 735 1.12 769 1.25 800 1.37 831 1.51 862 1.66 892 1.82 920 1.98 950 2.14 977 2.30
4080 756 1.26 789 1.40 821 1.54 851 1.68 879 1.82 908 1.97 936 2.13 964 2.30 991 2.48 1017 2.66
Table PD-47 — Continued
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
2-HP Standard Motor & Drive 3-HP Oversized Motor & Drive
2720 896 1.65 923 1.80 950 1.95 977 2.11 1003 2.26 1029 2.42 1053 2.57 1078 2.74 1102 2.90 1124 3.06
3060 932 1.88 959 2.04 985 2.20 1010 2.36 1034 2.53 1058 2.70 1082 2.87 1105 3.05 1129 3.22 1151 3.39
3400 969 2.15 996 2.31 1020 2.48 1045 2.65 1070 2.83 1093 3.00 1116 3.19 1138 3.37 — — — —
3740 1005 2.47 1032 2.64 1058 2.81 1083 2.99 1106 3.16 1129 3.35 — — — — — — — —
4080 1044 2.83 1069 3.01 1095 3.19 1119 3.37 — — — — — — — — — — — —
For Standard Evaporator Fan Speed (RPM), reference Table PD-86.
Notes:
Data includes pressure drop due to standard filters and wet coils.
No accessories or options are included in pressure drop data.
Refer to Table PD-89 to determine additional static pressure drop
due to other options/accessories
2-HP Fan Motor Heat (MBH) = 2.000 x Fan BHP+.5000.
3-HP Fan Motor Heat (MBH) = 2.900 x Fan BHP+.4750.
1. Field Supplied Fan Sheave AK79 and Belt AX38 required.
Factory supplied motors, in commercial equipment, are definite purpose motors, specifically designed and tested to operate reliably and continuously at all cataloged conditions. Using the full
horsepower range of our fan motors as shown in our tabular data will not result in nuisance tripping or premature motor failure. Our product’s warranty will not be affected.
RT-PRC006-EN