Spectre GCR Manual Manuals - Atari Documentation Archive
Spectre GCR Manual Manuals - Atari Documentation Archive
Spectre GCR Manual Manuals - Atari Documentation Archive
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
tf.i!\<br />
<strong>Spectre</strong> Menus<br />
<strong>GCR</strong>.<br />
Finally, you select single or double sided duplication. When you<br />
click on Duplicate, the copying will begin.<br />
If ro",<br />
It o<br />
fro", to<br />
• Drive A •<br />
0 Drive B 0<br />
• <strong>Spectre</strong> •<br />
0 Hac 0<br />
• Single sided<br />
0 Doub le sided<br />
uit I Dupl icate I<br />
Figure 13<br />
You can monitor progress of the copying by watching the twin<br />
boxes at the bottom of the screen; they are updated every 5 tracks during<br />
the copy process. There are 80 tracks total per side of a disk, thus,<br />
160 on a double sided disk.<br />
Also, the copy process is "smart" with regards to the ST's<br />
memory; if enough memory is available to hold the disk image, no<br />
disk swapping is necessary.<br />
Detect Disk Insertion: This option tells the <strong>Spectre</strong> whether or not<br />
to use the write-protect line to the floppy drives to detect a disk being<br />
inserted into a drive, or a disk being removed from a drive.<br />
(see Figure 14)<br />
(This has already been mentioned, but...)<br />
EDITOR: The manual is getting longer, Dave ...<br />
The ST hardware uses the disk's write protect line to detect disk<br />
85