DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Paper Selection
Select the paper source that contains the required paper size.
4-3
Copying Functions
NOTE: Specify in advance the size and type of the paper loaded in the cassette (refer to Original/Paper Settings on
page 8-7).
Selecting the Cassette
Use the procedure below to select the paper supply cassette.
Function Menu: a b
*********************
1 Paper Selection T
2 Collate T
3 Duplex T
[ Exit ]
Paper Selection: a b
*********************
1 * Auto
2 Lettera Plain
3 Customa Plain
1 Press the Copy key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the or key to select [Paper Selection].
5 Press the OK key. Paper Selection appears.
6 Press the or key to select the desired paper size.
If [Auto] is selected, the paper matching the size of the
original is selected automatically.
7 Press the OK key.
Completed. is displayed and the screen returns to the
basic screen for copying.
8 Press the Start key to start copying.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
4