02.06.2013 Views

DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Symptom Check Points Corrective Actions<br />

Cannot print with USB<br />

memory.<br />

When displaying an<br />

image sent from the<br />

machine on the PC, an<br />

image size is shrunk<br />

vertically or<br />

horizontally.<br />

USB memory not<br />

recognized.<br />

Vertical streaks<br />

appear on prints.<br />

The top edge or back<br />

of the paper is dirty.<br />

Part of the image is<br />

periodically faint or<br />

shows white lines.<br />

Is the USB host blocked? Select Unblock in the USB host<br />

settings.<br />

— Check that the USB memory is<br />

securely plugged into the machine.<br />

Have you selected<br />

200×100dpi Normal or<br />

200×400dpi Super Fine for<br />

the scan resolution?<br />

10-4<br />

Select a scan resolution other than<br />

200 × 100dpi Normal or 200 × 400dpi<br />

Super Fine when sending an image.<br />

— Check that the USB memory is<br />

securely plugged into the machine.<br />

Is the USB host blocked? Select Unblock in the USB host<br />

settings.<br />

Is the slit glass dirty? Clean the slit glass. 9-2<br />

The inside of the machine<br />

may be dirty.<br />

The inside of the machine<br />

may be dirty.<br />

Is the developer unit<br />

attached correctly?<br />

Check the toner container and if<br />

necessary replace.<br />

Troubleshooting<br />

8-145<br />

—<br />

5-12<br />

—<br />

8-145<br />

9-5<br />

Clean the inside of the machine. 9-3<br />

Attach the developer unit correctly. —<br />

— Open and then close the rear<br />

cover.<br />

Reference<br />

Page<br />

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!