DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

• Error Clear Timer
Timer Setting: a b
*********************
1 Sleep Timer
2 PanelReset Timer
3 Power Off Rule
[ Exit ]
Auto Err. Clear: a b
*********************
1 *Off
2 On
4 The Timer Settings menu appears.
8-34
Default Setting (System Menu)
5 Press the or key to select [Auto Err. Clear].
6 Press the OK key. Auto Err. Clear appears.
7 Press the or key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
If you select [On] for Auto Error Clear, set the amount of time to wait before automatically clearing errors. Options are
between 5 and 495 seconds (every five seconds). The default setting is 30 seconds.
If you set 0 as the time, errors are not displayed.
NOTE: If you select [Off] for Auto Error Clear, the time display does not appear.
Use the procedure below to set the automatic error clear delay.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the or key to select [Timer Setting], and press
the OK key.