DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Send/Box Density
8-99
Default Setting (System Menu)
7 Press the or key to select the density from [-3
Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to the Copy Denst. Adj. menu.
Adjust scan density when sending or storing the data in Document Box. Adjustment can be made in 7 levels both in
auto and manual density modes.
Sys. Menu/Count.:a b
: Document Box
; Edit Destination
*********************
< Adjust/Maint.
[ Exit ]
Adjust/Maint.: a b
*********************
1 Copy Denst. Adj.
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
Send/Box Density:a b
*********************
1 Auto
2 Manual
[ Exit ]
Manual: a b
3 -1
*********************
4 * 0 Normal
5 +1
1 In the Sys. Menu/Count. menu, press the or key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the or key to select [Send/Box Density].
4 Press the OK key. Send/Box Density appears.
5 Press the or key to select [Auto] or [Manual].
6 Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.
7 Press the or key to select the density from [-3
Lighter] to [+3 Darker].
8 Press the OK key. Completed. is displayed and the
screen returns to the Send/Box Density menu.
8