DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Date/Timer
Date/Timer settings include:
• Date/Time …8-28
• Date Format …8-30
• Time Zone …8-31
• Summer Time …8-32
• Auto Error Clear …8-33
• Power Off Rule …8-35
• Power Off Timer …8-37
• Auto Panel Reset …8-39
• Unusable Time …8-41
8-28
Default Setting (System Menu)
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and time
set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
1 In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the or key to select [Date Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).