DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

More documents

Recommendations

Info

Network Setup The following network settings are available. • LAN Interface Setup …8-116 • TCP/IP (IPv4) Setup …8-117 • TCP/IP (IPv6) Setup …8-126 • NetWare Setup …8-127 • AppleTalk Setup …8-128 • Protocol Detail …8-132 LAN Interface Setup Specify the settings for the LAN interface to be used. The default setting is Auto. Use the procedure below to select the interface. Sys. Menu/Count.:a b 1 Report 2 Counter ********************* 3 System [ Exit ] Login User Name: L b ******************* Login Password: [ Login ] System: a b ********************* 1 Network Setting 2 I/F Block Set. 3 Security Level [ Exit ] Network Setting: a b ********************* 1 TCP/IP Setting 2 NetWare 3 AppleTalk 8-116 Default Setting (System Menu) 1 In the Sys. Menu/Count. menu, press the or key to select [System], and press the OK key. A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2 The System menu appears. 3 Press the or key to select [Network Setting]. 4 Press the OK key. The Network Setting menu appears. 5 Press the or key to select [LAN Interface].
TCP/IP (IPv4) Setup LAN Interface: a b ********************* 1 *Auto 2 10Base-Half 3 10Base-Full 8-117 Default Setting (System Menu) 6 Press the OK key. LAN Interface appears. 7 Press the or key to select the desired LAN interface. The available LAN interfaces are as follows: Auto 10Base-Half 10Base-Full 100Base-Half 100Base-Full 8 Press the OK key. Completed. is displayed and the screen returns to the Network Setting menu. Set up TCP/IP to connect to the Windows network. Set the IP addresses, subnet masks, and gateway addresses. The default settings are "TCP/IP Protocol: On, DHCP: On, Bonjour: Off". NOTE: Prior to the IP address entries, obtain permission from the network administrator. Use the procedure below to setup the TCP/IP (IPv4) setting. Sys. Menu/Count.:a b 1 Report 2 Counter ********************* 3 System [ Exit ] Login User Name: L b ******************* Login Password: [ Login ] System: a b ********************* 1 Network Setting 2 I/F Block Set. 3 Security Level [ Exit ] 1 In the Sys. Menu/Count. menu, press the or key to select [System], and press the OK key. A login screen will appear. Then, enter the user ID and password with administrator privileges to log in, and press [Login] (the Right Select key). 2 The System menu appears. 8
Page 1 and 2:
DC 6130 / P / 6135 / 6230 / 6235 Us
Page 3 and 4:
Safety Conventions in This Guide Th
Page 5 and 6:
Zoom . . . . . . . . . . . . . . .
Page 7 and 8:
Quick Guide To make copies To print
Page 9 and 10:
To send a FAX(FAX functions availab
Page 11 and 12:
Send key (Continued from previous p
Page 13 and 14:
System Menu/ Counter key (Continued
Page 15 and 16:
System Menu/ Counter key (Continued
Page 17 and 18:
Environment The service environment
Page 19 and 20:
Laser Safety (Europe) Laser radiati
Page 21 and 22:
Legal and Safety Information Please
Page 23 and 24:
GPL/LGPL This product contains GPL
Page 25 and 26:
Monotype Imaging License Agreement
Page 27 and 28:
About this Operation Guide This Ope
Page 29 and 30:
1 Part Names This chapter identifie
Page 31 and 32:
Used to select a menu item, move th
Page 33 and 34:
13 14 15 13 Inner Tray 14 Paper Len
Page 35 and 36:
2 Preparation before Use This chapt
Page 37 and 38:
Determining the Connection Method a
Page 39 and 40:
Connecting Cables Follow the steps
Page 41 and 42:
Power Off Timer 2-7 Preparation bef
Page 43 and 44:
Language: a b *********************
Page 45 and 46:
Time Zone: a b GMT Casablanca *****
Page 47 and 48:
Network Setup (LAN Cable Connection
Page 49 and 50:
Installing Software 2-15 Preparatio
Page 51 and 52:
2 Select the printer you want to be
Page 53 and 54:
Preparation before Use 4 Double-cli
Page 55 and 56:
10 Click the IP icon for an IP conn
Page 57 and 58:
5 Click Uninstall. 2-23 Preparation
Page 59 and 60:
Preparation before Use Setting the
Page 61 and 62:
Sending E-mail 2-27 Preparation bef
Page 63 and 64:
Preparation for sending a document
Page 65 and 66:
1 Create a folder on the local disk
Page 67 and 68:
Preparation before Use 8 Click the
Page 69 and 70:
Configuring Windows Firewall (for W
Page 71 and 72:
Preparation before Use 7 Select All
Page 73 and 74:
Loading Paper 2-39 Preparation befo
Page 75 and 76:
Preparation before Use 3 Adjust the
Page 77 and 78:
Loading Paper in the Multi Purpose
Page 79 and 80:
1 Pull the MP tray towards you unti
Page 81 and 82:
Specifying Paper Size and Media 2-4
Page 83 and 84:
Cassette 1 Set.: a b 1 Cassette 1 S
Page 85 and 86:
MP Tray Size: a b *****************
Page 87 and 88:
Loading Originals in the Document P
Page 89 and 90:
3 Basic Operation This chapter expl
Page 91 and 92:
One-Touch Keys and Program Keys The
Page 93 and 94:
ID Card Copy The procedure for usin
Page 95 and 96:
Copying Follow the steps as below f
Page 97 and 98:
Selecting Image Quality Select imag
Page 99 and 100:
The procedure for using zoom copyin
Page 101 and 102:
The procedure for using two-sided/d
Page 103 and 104:
Collate Copying The machine can col
Page 105 and 106:
Printing Using Half Speed Mode 7 Cl
Page 107 and 108:
Send as E-mail Sends a scanned orig
Page 109 and 110:
Send to Folder (SMB)/Send to Folder
Page 111 and 112:
For send to folder (SMB) For send t
Page 113 and 114:
Specifying Destination When specify
Page 115 and 116:
Search(Name): A b ma* S ABC [ Menu
Page 117 and 118:
Checking Remaining Toner and Paper
Page 119 and 120:
4 Copying Functions This chapter ex
Page 121 and 122:
Paper Selection Select the paper so
Page 123 and 124:
Paper Selection: a b **************
Page 125 and 126:
Use the procedure below to select t
Page 127 and 128:
Combine Mode 4-9 Copying Functions
Page 129 and 130:
Types of Page Boundary Lines The fo
Page 131 and 132:
Continuous Scan 4-13 Copying Functi
Page 133 and 134:
Destination: a b ******************
Page 135 and 136:
Print Override 4-17 Copying Functio
Page 137 and 138:
5 Sending Functions This chapter ex
Page 139 and 140:
Sending Size Select the sending siz
Page 141 and 142:
Zoom Scans the original by automati
Page 143 and 144:
Original Orientation 5-7 Sending Fu
Page 145 and 146:
File Format Select the file format
Page 147 and 148:
Adjusting Density Use the procedure
Page 149 and 150:
Color / Grayscale / Black and White
Page 151 and 152:
File Name Entry 5-15 Sending Functi
Page 153 and 154:
WSD Scan WSD Scan saves images of o
Page 155 and 156:
Job Finish Notice This feature send
Page 157 and 158:
FTP Encrypted TX 5-21 Sending Funct
Page 159 and 160:
Scanning Image using Application 5-
Page 161 and 162:
6 Document Box This chapter explain
Page 163 and 164:
TIFF Print USB Memory: N Store File
Page 165 and 166:
Saving Documents to USB Memory (Sca
Page 167 and 168:
Removing USB Memory Remove the USB
Page 169 and 170:
Menu: a b ********************* 1 S
Page 171 and 172:
Menu: a b ********************* 1 S
Page 173 and 174:
7 Status / Job Cancel This chapter
Page 175 and 176:
0009 Detail: C b Status: 1/8 Proces
Page 177 and 178:
When complete job name not displaye
Page 179 and 180:
Page 181 and 182:
0006 Detail: C b Result: 1/9 Error
Page 183 and 184:
Page 185 and 186:
Sending the Job Log History 7-13 St
Page 187 and 188:
Registering Destination Destination
Page 189 and 190:
Setting E-mail Subject Enter destin
Page 191 and 192:
Device/Communication 7-19 Status /
Page 193 and 194:
8 Default Setting (System Menu) Thi
Page 195 and 196:
Switching the Language for Display
Page 197 and 198:
Default Screen Select the screen ap
Page 199 and 200:
Display Bright. Set the brightness
Page 201 and 202:
Default Original Size Setup 8-9 Def
Page 203 and 204:
Custom PaperSize a b **************
Page 205 and 206:
Cassette 1 Set.: a b **************
Page 207 and 208:
MP Tray Set.: a b *****************
Page 209 and 210:
Sys. Menu/Count.: a b 3 System 4 Us
Page 211 and 212:
Custom X: a b *********************
Page 213 and 214:
Default Paper Source Select the def
Page 215 and 216:
Common Settings: a b **************
Page 217 and 218:
Switching Unit of Measurement Selec
Page 219 and 220:
DuplexPaperError: a b 1 1-sided ***
Page 221 and 222:
Date Setting: a b *****************
Page 223 and 224:
Time Zone Set the time difference i
Page 225 and 226:
Auto Error Clear 8-33 Default Setti
Page 227 and 228:
Power Off Rule Login User Name: L b
Page 229 and 230:
Power Off Timer The time until the
Page 231 and 232:
Auto Panel Reset 8-39 Default Setti
Page 233 and 234:
Unusable Time PanelReset Timer:D b
Page 235 and 236:
Function Defaults 8-43 Default Sett
Page 237 and 238:
Original Image Set the default orig
Page 239 and 240:
Zoom 8-47 Default Setting (System M
Page 241 and 242:
Orig.Orientation Set the original o
Page 243 and 244:
File Name Entry 8-51 Default Settin
Page 245 and 246:
Continuous Scan Function Default: a
Page 247 and 248:
File Separation Sys. Menu/Count.: a
Page 249 and 250:
XPS FitTo Page Common Settings: a b
Page 251 and 252:
4 in 1 Layout Function Default: a b
Page 253 and 254:
Border Line 8-61 Default Setting (S
Page 255 and 256:
Finish Binding Detail Setting: a b
Page 257 and 258: Color TIFF Comp. Function Default:
Page 259 and 260: Login Operation 8-67 Default Settin
Page 261 and 262: Copy Settings The following setting
Page 263 and 264: Auto Paper Selection 8-71 Default S
Page 265 and 266: Select Key Set 8-73 Default Setting
Page 267 and 268: Printer Settings 8-75 Default Setti
Page 269 and 270: When KPDL Is Selected for Emulation
Page 271 and 272: Override A4/LTR 8-79 Default Settin
Page 273 and 274: Copies Set the default number of co
Page 275 and 276: FormFeed Timeout 8-83 Default Setti
Page 277 and 278: Paper Feed Mode Printer: a b ******
Page 279 and 280: Sending Settings The sending settin
Page 281 and 282: Document Box Settings The following
Page 283 and 284: Select Key Set 8-91 Default Setting
Page 285 and 286: Printing Reports/Sending Notice 8-9
Page 287 and 288: 8-95 Default Setting (System Menu)
Page 289 and 290: Report: a b ********************* 1
Page 291 and 292: Send/Box Density 8-99 Default Setti
Page 293 and 294: New Developer Correct. Bk Line:a b
Page 295 and 296: Entering Contact Name Add Address:
Page 297 and 298: Folder (FTP) Address The table belo
Page 299 and 300: Address Number 8-107 Default Settin
Page 301 and 302: Entering Group Name Entering Group
Page 303 and 304: Entering Address Number 8-111 Defau
Page 305 and 306: Adding a Destination on One-touch K
Page 307: Restarting the System Sys. Menu/Cou
Page 311 and 312: DHCP: a b 1 Off 2 *****************
Page 313 and 314: Default Gateway: a b 000.000.000.00
Page 315 and 316: TCP/IP: a b 1 Off *****************
Page 317 and 318: TCP/IP: a b ********************* 1
Page 319 and 320: NetWare Setup IPv6 Setting: a b ***
Page 321 and 322: WSD Scan Setup Network Setting: a b
Page 323 and 324: Network Setting: a b **************
Page 325 and 326: Use the procedure below. Item Descr
Page 327 and 328: Network Security The network securi
Page 329 and 330: IPP Security Network Setting: a b *
Page 331 and 332: Login User Name: L b **************
Page 333 and 334: SMTP Security Secure Protocol: a b
Page 335 and 336: POP3 Security 8-143 Default Setting
Page 337 and 338: Interface Block Setting 8-145 Defau
Page 339 and 340: USB Device: a b *******************
Page 341 and 342: Security Level (Security Level sett
Page 343 and 344: 9 Maintenance This chapter describe
Page 345 and 346: Cleaning the Machine 9-3 Maintenanc
Page 347 and 348: Toner Container Replacement When th
Page 349 and 350: 10 Troubleshooting This chapter exp
Page 351 and 352: Symptom Check Points Corrective Act
Page 353 and 354: Symptom Check Points Corrective Act
Page 355 and 356: Error Message Check Points Correcti
Page 357 and 358: Error Message Check Points Correcti
Page 359 and 360:
Error Message Check Points Correcti
Page 361 and 362:
Clearing Paper Jams If a paper jam
Page 363 and 364:
Duplexer Paper is jammed in the dup
Page 365 and 366:
Rear Cover Follow the steps below t
Page 367 and 368:
11 Management This chapter explains
Page 369 and 370:
Use the procedure below to enable u
Page 371 and 372:
Login/Logout 11-5 Management Once y
Page 373 and 374:
Login User Name: L b **************
Page 375 and 376:
Changing User Properties User infor
Page 377 and 378:
Enabling/Disabling Group Authentica
Page 379 and 380:
User Login Set.: a b **************
Page 381 and 382:
Job Accounting 11-15 Management Job
Page 383 and 384:
Login/Logout If job accounting is e
Page 385 and 386:
Managing Accounts Job Account.Set.:
Page 387 and 388:
Account. List: k UI R&D DEP. a b **
Page 389 and 390:
Job Account.Set: a b **************
Page 391 and 392:
Detail: C b Print Restrict.: 4/7 To
Page 393 and 394:
Default Setting: a b **************
Page 395 and 396:
Login User Name: L b **************
Page 397 and 398:
Counting the Number of Pages Printe
Page 399 and 400:
Each Job Accounting/Resetting the C
Page 401 and 402:
Printing an Accounting Report Total
Page 403 and 404:
Checking the Counter You can check
Page 405 and 406:
Appendix • Optional Equipment....
Page 407 and 408:
Precautions for Handling the Memory
Page 409 and 410:
Character Entry Method In character
Page 411 and 412:
Entering Characters After selecting
Page 413 and 414:
Paper This section explains the pap
Page 415 and 416:
Basic Paper Specifications This mac
Page 417 and 418:
Basis Weight In countries that use
Page 419 and 420:
Transparency (OHP film) Transparenc
Page 421 and 422:
Some label paper has large margins
Page 423 and 424:
Weight (without toner container) Sp
Page 425 and 426:
Scanner functions *1 Available Oper
Page 427 and 428:
Glossary AppleTalk AppleTalk, which
Page 429 and 430:
Send as E-mail A function to send t
Page 431 and 432:
Index Numerics 1-sided/2-sided Sele
Page 433 and 434:
Job Box 8-89 Job Retention Deletion
Page 435 and 436:
Network 8-116 Printer 8-75 Send 8-8
Page 438:
Rev.2 2011.11 2MHGEEN002
show all

DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Create successful ePaper yourself

Delete template?

Save as template?