DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

NetWare Setup
IPv6 Setting: a b
*********************
1 *Off
2 On
[ Exit ]
8-127
Default Setting (System Menu)
8 Press the OK key. IPv6 Setting appears.
9 Press the or key to select [On] or [Off].
10 Press the OK key. Completed. is displayed and the
screen returns to the TCP/IP Settings menu.
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "On".
Use the procedure below to setup the NetWare setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
*********************
1 TCP/IP Settings
2 NetWare
3 AppleTalk
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the or key to select [NetWare].
8