DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Network Security
The network security functions can be set up to protect printer operation and the print data.
The following network security settings are available.
• IPSec Setting …8-135
• SSL Setting …8-136
• SNMPv3 Setting …8-144
IPSec Setting
8-135
Default Setting (System Menu)
Make this setting when you use IPSec. The default setting is Off and that of Rule Setting is also Off.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
4 WSD-SCAN
5 WSD-PRINT
*********************
6 IPSec
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the or key to select [IPSec].
8