DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

RAM Disk Mode
8-68
Default Setting (System Menu)
When optional memory is installed, a RAM disk can be created and its size can be set. Creating a RAM disk makes
it possible to print from a Job Box.
The procedure for setting the RAM Disk Mode is explained below.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
RAM Disk Mode: a b
*********************
1 *Off
2 On
RAM Disk Size: L b
(1 - 64)
********MB 64
Restart.
Are you sure?
[ Yes ] [ No ]
1 In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the or key to select [RAM Disk Mode].
4 Press the OK key. RAM Disk Mode appears.
5 Press the or key to select [Off] or [On].
6 If [On] is selected and the OK key is pressed, the RAM
disk size screen appears.
If [Off] is selected and the OK key is pressed, proceed to
step 8.
7 Press the or key or the numeric keys to enter the
size of the RAM disk.
8 A confirmation screen appears. Press [Yes] (the Left
Select key). The machine is restarted.