DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Sleep Timer
8-38
Default Setting (System Menu)
The time until the machine enters sleep mode can be set. Options are between 1 and 240 minutes (every one minute).
Use the procedure below to set the Sleep Timer. The default setting is 1 minute.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
5 Common Settings
[ Exit ]
Common Settings: a b
*********************
1 Language
2 Default Screen
3 Sound
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
Timer Setting: a b
*********************
1 Err. Clear Timer
2 Sleep Timer
3 PanelReset Timer
[ Exit ]
Sleep Timer: M b
(1 - 240)
*******1*min.
1 In the Sys. Menu/Count. menu, press the or key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the or key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
4 The Timer Settings menu appears.
5 Press the or key to select [Sleep Timer].
6 Press the OK key. Sleep Timer appears.
7 Press the or key to set the Sleep Timer. Set the
amount of time before entering the sleep state in
minutes. You cannot use the numeric keys to enter this
value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.