DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Adjustment/Maintenance
Adjust printing quality and conduct machine maintenance.
• Copy Denst. Adj. …8-98
• Send/Box Density …8-99
• Correct. Bk Line …8-100
• New Developer...8-101
8-98
Default Setting (System Menu)
NOTE: If user login administration is enabled, you can only change the settings by logging in with administrator
privileges.
Copy Denst. Adj.
Adjust copy density. Adjustment can be made in 7 levels both in auto and manual density modes.
Use the procedure below to adjust the copy density.
Sys. Menu/Count.:a b
: Document Box
; Edit Destination
*********************
< Adjust/Maint.
[ Exit ]
Adjust/Maint.: a b
*********************
1 Copy Denst. Adj.
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
Copy Denst. Adj.:a b
*********************
1 Auto
2 Manual
[ Exit ]
Manual: a b
3 -1
*********************
4 * 0 Normal
5 +1
1 In the Sys. Menu/Count. menu, press the or key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the or key to select [Copy Denst. Adj.].
4 Press the OK key. Copy Denst. Adj. appears.
5 Press the or key to select [Auto] or [Manual].
6 Press the OK key. This displays the density selection
screen for the mode selected in step 5. The screen
shown is the one when [Manual] is selected.