DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

SMTP Security
Secure Protocol: a b
2 IPP Security
3 HTTP Security
*********************
4 LDAP Security
[ Exit ]
LDAP Security: a b
*********************
1 *Off
2 SSL/TLS
3 STARTTLS
8-141
Default Setting (System Menu)
5 Press the or key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the or key to select [LDAP Security].
8 Press the OK key. LDAP Security appears.
9 Press the or key to select [Off], [SSL/TLS] or
[STARTTLS].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
Select the communication protocol according to the type of security employed by the SMTP server. The default setting
is Off.
NOTE: SMTP (E-mail TX) must be set to On in Protocol Detail on page 8-132.
The table below shows the available settings.
Item Description
Off Do not use security employed by the SMTP server.
SSL/TLS Encryption is applied any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server settings.
Typically, 465* for SSL/TLS is well-known SMTP port.
STARTTLS Encryption is applied any data communication. Typically, 25* or 587* for
STARTTLS is well-known SMTP port.
* You can change the port number using Embedded Web Server.
Use the procedure below to make the setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
1 In the Sys. Menu/Count. menu, press the or key to
select [System], and press the OK key.
8