DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

AppleTalk Setup
NetWare: a b
1 Off
*********************
2 *On
Frame Type: a b
*********************
1 *Auto
2 802.3
3 Ether-II
6 Press the OK key. NetWare appears.
8-128
Default Setting (System Menu)
7 Press the or key to select [On] or [Off].
If you select [On] and press the OK key, Frame Type
appears. Press the or key to select the desired
frame type.
The available frame types are as follows:
Auto
802.3
Ether-II
802.2
SNAP
Select the Apple Talk network connection. The default setting is On.
Use the procedure below to setup the AppleTalk setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
8 Press the OK key. Completed. is displayed and the
screen returns to the Network Setting menu.
For detailed information on restarting the system, refer to
Restarting the System on page 8-115.
1 In the Sys. Menu/Count. menu, press the or key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.