DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

USB Device: a b
*********************
1 *Unblock
2 Block
Optional interface (Optional interface card setting)
8-147
Default Setting (System Menu)
6 Press the OK key. USB Device appears.
This locks and protects the optional interface slot. The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
1 Network Setting
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
I/F Block Set.:
1 USB Host
2 USB Device
a b
*********************
3 Option I/F
[ Exit ]
7 Press the or key to select [Unblock] or [Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
1 In the Sys. Menu/Count. menu, press the or key to
select [System].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 Press the OK key. The System menu appears.
3 Press the or key to select [I/F Block Set.].
4 Press the OK key. The I/F Block Set. menu appears.
5 Press the or key to select [Option I/F].
8