DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Editing One-touch Key
Edit/delete the destinations you added to One-touch Key.
Use the procedure below to edit the one-touch key.
Select Key No.: a b
*********************
1 No. 1
2 No. 12
[ Exit ]
Key Edit: a b
*********************
1 Edit
2 Detail
3 Delete
[ Exit ]
Addressbook: a b
*********************
k Design
l Fiala
l Maury
[ Menu ]
Overwrite.
Are you sure?
z No. 1
[ Yes ] [ No ]
8-114
Default Setting (System Menu)
1 In the Send or FAX screen, press the one-touch key
where you want to edit the destination and hold it (2
seconds or longer). Select Key Set. appears.
The screen shown is the one when No.1/No.12 is
pressed and held.
2 Press the or key to select the key number where
you want to edit the destination.
3 Press the OK key. The Key Edit appears.
4 Press the or key to select [Edit].
NOTE: If you select [Delete] here and press the OK key,
you can delete the registration of the destination. If you
press [Yes] (the Left Select key) in the screen that appears,
Completed. is displayed and the registration of the
destination is deleted.
5 Press the OK key. The Address Book list screen
appears.
6 Press the or key to select the destination you want
to newly register.
NOTE: If you want to search from the Address Book, refer
to Search in Address Book on page 3-26.
7 Press the OK key. A confirmation screen appears.
8 Press [Yes] (the Left Select key). The selected
destination is registered to the one-touch key,
overwriting the previous one. Registered. is displayed
and the screen returns to the basic screen.