DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Original Orientation
5-7
Sending Functions
To send the document in the orientation that can be read properly, specify the upper orientation of original. To use
the functions below, select the orientation in which the original is set on the platen.
• 1-sided / 2-sided Selection
When placing the original on the platen
[Top Edge Top] [Top Edge Left]
When placing the original on the document processor
[Top Edge Top]
Use the procedure below to select the orientation when placing the originals on the platen for sending.
Function Menu: a b
*********************
1 Color Selection T
2 Original Size T
3 Original Image T
[ Exit ]
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 *d Top Edge Left
[Top Edge Left]
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the or key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
5