DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

More documents

Recommendations

Info

NOTE: In Windows XP or Windows Vista, follow the procedure below to set the port. 2-38 Preparation before Use 1 From the Start menu, select Control Panel, System and Security (or Security Center), and then Check Firewall Status (or Windows Firewall). If the User Account Control dialog box appears, click the Continue button. 2 Click the Exceptions tab and then the Add port... button. 3 Specify Add a Port settings. Enter any name in "Name" (example: Scan to SMB). This will be the name of the new port. Enter "139" in "Port Number". Select TCP for "Protocol". 4 Click the OK button to close the Folder Options screen.
Loading Paper 2-39 Preparation before Use Paper can be loaded standardly in the cassette and the multi purpose tray. A paper feeder is also available as an option (refer to Optional Equipment on Appendix-2). Before Loading Paper When you open a new package of paper, fan the sheets to separate them slightly prior to loading in the following steps. 1 Bend the whole set of sheets to swell them in the middle. 2 Hold the stack at both ends and stretch it while keeping the entire stack swelled. 3 Raise the right and left hands alternately to create a gap and feed air between the papers. 4 Finally, align the papers on a level, flat table. If the paper is curled or folded, straighten it before loading. Paper that is curled or folded may cause a jam. CAUTION: If you copy onto used paper (paper already used for copying), do not use paper that is stapled or clipped together. This may damage the machine. NOTE: If printouts are curled or not neatly stapled, turn the stack in the cassette upside down. Avoid exposing opened paper to high temperatures and high humidity as dampness can be a cause of problems. Seal any remaining paper after loading in the multi purpose tray or cassettes back in the paper storage bag. If the machine will not be used for a prolonged period, protect all paper from humidity by removing it from the cassettes and sealing it in the paper storage bag. NOTE: If you use special paper such as letterhead, paper with holes or paper with pre-prints like logo or company name, refer to Paper on Appendix-9. 2
Page 1 and 2:
DC 6130 / P / 6135 / 6230 / 6235 Us
Page 3 and 4:
Safety Conventions in This Guide Th
Page 5 and 6:
Zoom . . . . . . . . . . . . . . .
Page 7 and 8:
Quick Guide To make copies To print
Page 9 and 10:
To send a FAX(FAX functions availab
Page 11 and 12:
Send key (Continued from previous p
Page 13 and 14:
System Menu/ Counter key (Continued
Page 15 and 16:
System Menu/ Counter key (Continued
Page 17 and 18:
Environment The service environment
Page 19 and 20:
Laser Safety (Europe) Laser radiati
Page 21 and 22: Legal and Safety Information Please
Page 23 and 24: GPL/LGPL This product contains GPL
Page 25 and 26: Monotype Imaging License Agreement
Page 27 and 28: About this Operation Guide This Ope
Page 29 and 30: 1 Part Names This chapter identifie
Page 31 and 32: Used to select a menu item, move th
Page 33 and 34: 13 14 15 13 Inner Tray 14 Paper Len
Page 35 and 36: 2 Preparation before Use This chapt
Page 37 and 38: Determining the Connection Method a
Page 39 and 40: Connecting Cables Follow the steps
Page 41 and 42: Power Off Timer 2-7 Preparation bef
Page 43 and 44: Language: a b *********************
Page 45 and 46: Time Zone: a b GMT Casablanca *****
Page 47 and 48: Network Setup (LAN Cable Connection
Page 49 and 50: Installing Software 2-15 Preparatio
Page 51 and 52: 2 Select the printer you want to be
Page 53 and 54: Preparation before Use 4 Double-cli
Page 55 and 56: 10 Click the IP icon for an IP conn
Page 57 and 58: 5 Click Uninstall. 2-23 Preparation
Page 59 and 60: Preparation before Use Setting the
Page 61 and 62: Sending E-mail 2-27 Preparation bef
Page 63 and 64: Preparation for sending a document
Page 65 and 66: 1 Create a folder on the local disk
Page 67 and 68: Preparation before Use 8 Click the
Page 69 and 70: Configuring Windows Firewall (for W
Page 71: Preparation before Use 7 Select All
Page 75 and 76: Preparation before Use 3 Adjust the
Page 77 and 78: Loading Paper in the Multi Purpose
Page 79 and 80: 1 Pull the MP tray towards you unti
Page 81 and 82: Specifying Paper Size and Media 2-4
Page 83 and 84: Cassette 1 Set.: a b 1 Cassette 1 S
Page 85 and 86: MP Tray Size: a b *****************
Page 87 and 88: Loading Originals in the Document P
Page 89 and 90: 3 Basic Operation This chapter expl
Page 91 and 92: One-Touch Keys and Program Keys The
Page 93 and 94: ID Card Copy The procedure for usin
Page 95 and 96: Copying Follow the steps as below f
Page 97 and 98: Selecting Image Quality Select imag
Page 99 and 100: The procedure for using zoom copyin
Page 101 and 102: The procedure for using two-sided/d
Page 103 and 104: Collate Copying The machine can col
Page 105 and 106: Printing Using Half Speed Mode 7 Cl
Page 107 and 108: Send as E-mail Sends a scanned orig
Page 109 and 110: Send to Folder (SMB)/Send to Folder
Page 111 and 112: For send to folder (SMB) For send t
Page 113 and 114: Specifying Destination When specify
Page 115 and 116: Search(Name): A b ma* S ABC [ Menu
Page 117 and 118: Checking Remaining Toner and Paper
Page 119 and 120: 4 Copying Functions This chapter ex
Page 121 and 122: Paper Selection Select the paper so
Page 123 and 124:
Paper Selection: a b **************
Page 125 and 126:
Use the procedure below to select t
Page 127 and 128:
Combine Mode 4-9 Copying Functions
Page 129 and 130:
Types of Page Boundary Lines The fo
Page 131 and 132:
Continuous Scan 4-13 Copying Functi
Page 133 and 134:
Destination: a b ******************
Page 135 and 136:
Print Override 4-17 Copying Functio
Page 137 and 138:
5 Sending Functions This chapter ex
Page 139 and 140:
Sending Size Select the sending siz
Page 141 and 142:
Zoom Scans the original by automati
Page 143 and 144:
Original Orientation 5-7 Sending Fu
Page 145 and 146:
File Format Select the file format
Page 147 and 148:
Adjusting Density Use the procedure
Page 149 and 150:
Color / Grayscale / Black and White
Page 151 and 152:
File Name Entry 5-15 Sending Functi
Page 153 and 154:
WSD Scan WSD Scan saves images of o
Page 155 and 156:
Job Finish Notice This feature send
Page 157 and 158:
FTP Encrypted TX 5-21 Sending Funct
Page 159 and 160:
Scanning Image using Application 5-
Page 161 and 162:
6 Document Box This chapter explain
Page 163 and 164:
TIFF Print USB Memory: N Store File
Page 165 and 166:
Saving Documents to USB Memory (Sca
Page 167 and 168:
Removing USB Memory Remove the USB
Page 169 and 170:
Menu: a b ********************* 1 S
Page 171 and 172:
Menu: a b ********************* 1 S
Page 173 and 174:
7 Status / Job Cancel This chapter
Page 175 and 176:
0009 Detail: C b Status: 1/8 Proces
Page 177 and 178:
When complete job name not displaye
Page 179 and 180:
Page 181 and 182:
0006 Detail: C b Result: 1/9 Error
Page 183 and 184:
Page 185 and 186:
Sending the Job Log History 7-13 St
Page 187 and 188:
Registering Destination Destination
Page 189 and 190:
Setting E-mail Subject Enter destin
Page 191 and 192:
Device/Communication 7-19 Status /
Page 193 and 194:
8 Default Setting (System Menu) Thi
Page 195 and 196:
Switching the Language for Display
Page 197 and 198:
Default Screen Select the screen ap
Page 199 and 200:
Display Bright. Set the brightness
Page 201 and 202:
Default Original Size Setup 8-9 Def
Page 203 and 204:
Custom PaperSize a b **************
Page 205 and 206:
Cassette 1 Set.: a b **************
Page 207 and 208:
MP Tray Set.: a b *****************
Page 209 and 210:
Sys. Menu/Count.: a b 3 System 4 Us
Page 211 and 212:
Custom X: a b *********************
Page 213 and 214:
Default Paper Source Select the def
Page 215 and 216:
Common Settings: a b **************
Page 217 and 218:
Switching Unit of Measurement Selec
Page 219 and 220:
DuplexPaperError: a b 1 1-sided ***
Page 221 and 222:
Date Setting: a b *****************
Page 223 and 224:
Time Zone Set the time difference i
Page 225 and 226:
Auto Error Clear 8-33 Default Setti
Page 227 and 228:
Power Off Rule Login User Name: L b
Page 229 and 230:
Power Off Timer The time until the
Page 231 and 232:
Auto Panel Reset 8-39 Default Setti
Page 233 and 234:
Unusable Time PanelReset Timer:D b
Page 235 and 236:
Function Defaults 8-43 Default Sett
Page 237 and 238:
Original Image Set the default orig
Page 239 and 240:
Zoom 8-47 Default Setting (System M
Page 241 and 242:
Orig.Orientation Set the original o
Page 243 and 244:
File Name Entry 8-51 Default Settin
Page 245 and 246:
Continuous Scan Function Default: a
Page 247 and 248:
File Separation Sys. Menu/Count.: a
Page 249 and 250:
XPS FitTo Page Common Settings: a b
Page 251 and 252:
4 in 1 Layout Function Default: a b
Page 253 and 254:
Border Line 8-61 Default Setting (S
Page 255 and 256:
Finish Binding Detail Setting: a b
Page 257 and 258:
Color TIFF Comp. Function Default:
Page 259 and 260:
Login Operation 8-67 Default Settin
Page 261 and 262:
Copy Settings The following setting
Page 263 and 264:
Auto Paper Selection 8-71 Default S
Page 265 and 266:
Select Key Set 8-73 Default Setting
Page 267 and 268:
Printer Settings 8-75 Default Setti
Page 269 and 270:
When KPDL Is Selected for Emulation
Page 271 and 272:
Override A4/LTR 8-79 Default Settin
Page 273 and 274:
Copies Set the default number of co
Page 275 and 276:
FormFeed Timeout 8-83 Default Setti
Page 277 and 278:
Paper Feed Mode Printer: a b ******
Page 279 and 280:
Sending Settings The sending settin
Page 281 and 282:
Document Box Settings The following
Page 283 and 284:
Select Key Set 8-91 Default Setting
Page 285 and 286:
Printing Reports/Sending Notice 8-9
Page 287 and 288:
8-95 Default Setting (System Menu)
Page 289 and 290:
Report: a b ********************* 1
Page 291 and 292:
Send/Box Density 8-99 Default Setti
Page 293 and 294:
New Developer Correct. Bk Line:a b
Page 295 and 296:
Entering Contact Name Add Address:
Page 297 and 298:
Folder (FTP) Address The table belo
Page 299 and 300:
Address Number 8-107 Default Settin
Page 301 and 302:
Entering Group Name Entering Group
Page 303 and 304:
Entering Address Number 8-111 Defau
Page 305 and 306:
Adding a Destination on One-touch K
Page 307 and 308:
Restarting the System Sys. Menu/Cou
Page 309 and 310:
TCP/IP (IPv4) Setup LAN Interface:
Page 311 and 312:
DHCP: a b 1 Off 2 *****************
Page 313 and 314:
Default Gateway: a b 000.000.000.00
Page 315 and 316:
TCP/IP: a b 1 Off *****************
Page 317 and 318:
TCP/IP: a b ********************* 1
Page 319 and 320:
NetWare Setup IPv6 Setting: a b ***
Page 321 and 322:
WSD Scan Setup Network Setting: a b
Page 323 and 324:
Network Setting: a b **************
Page 325 and 326:
Use the procedure below. Item Descr
Page 327 and 328:
Network Security The network securi
Page 329 and 330:
IPP Security Network Setting: a b *
Page 331 and 332:
Login User Name: L b **************
Page 333 and 334:
SMTP Security Secure Protocol: a b
Page 335 and 336:
POP3 Security 8-143 Default Setting
Page 337 and 338:
Interface Block Setting 8-145 Defau
Page 339 and 340:
USB Device: a b *******************
Page 341 and 342:
Security Level (Security Level sett
Page 343 and 344:
9 Maintenance This chapter describe
Page 345 and 346:
Cleaning the Machine 9-3 Maintenanc
Page 347 and 348:
Toner Container Replacement When th
Page 349 and 350:
10 Troubleshooting This chapter exp
Page 351 and 352:
Symptom Check Points Corrective Act
Page 353 and 354:
Symptom Check Points Corrective Act
Page 355 and 356:
Error Message Check Points Correcti
Page 357 and 358:
Page 359 and 360:
Page 361 and 362:
Clearing Paper Jams If a paper jam
Page 363 and 364:
Duplexer Paper is jammed in the dup
Page 365 and 366:
Rear Cover Follow the steps below t
Page 367 and 368:
11 Management This chapter explains
Page 369 and 370:
Use the procedure below to enable u
Page 371 and 372:
Login/Logout 11-5 Management Once y
Page 373 and 374:
Page 375 and 376:
Changing User Properties User infor
Page 377 and 378:
Enabling/Disabling Group Authentica
Page 379 and 380:
User Login Set.: a b **************
Page 381 and 382:
Job Accounting 11-15 Management Job
Page 383 and 384:
Login/Logout If job accounting is e
Page 385 and 386:
Managing Accounts Job Account.Set.:
Page 387 and 388:
Account. List: k UI R&D DEP. a b **
Page 389 and 390:
Job Account.Set: a b **************
Page 391 and 392:
Detail: C b Print Restrict.: 4/7 To
Page 393 and 394:
Default Setting: a b **************
Page 395 and 396:
Page 397 and 398:
Counting the Number of Pages Printe
Page 399 and 400:
Each Job Accounting/Resetting the C
Page 401 and 402:
Printing an Accounting Report Total
Page 403 and 404:
Checking the Counter You can check
Page 405 and 406:
Appendix • Optional Equipment....
Page 407 and 408:
Precautions for Handling the Memory
Page 409 and 410:
Character Entry Method In character
Page 411 and 412:
Entering Characters After selecting
Page 413 and 414:
Paper This section explains the pap
Page 415 and 416:
Basic Paper Specifications This mac
Page 417 and 418:
Basis Weight In countries that use
Page 419 and 420:
Transparency (OHP film) Transparenc
Page 421 and 422:
Some label paper has large margins
Page 423 and 424:
Weight (without toner container) Sp
Page 425 and 426:
Scanner functions *1 Available Oper
Page 427 and 428:
Glossary AppleTalk AppleTalk, which
Page 429 and 430:
Send as E-mail A function to send t
Page 431 and 432:
Index Numerics 1-sided/2-sided Sele
Page 433 and 434:
Job Box 8-89 Job Retention Deletion
Page 435 and 436:
Network 8-116 Printer 8-75 Send 8-8
Page 438:
Rev.2 2011.11 2MHGEEN002
show all

DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Create successful ePaper yourself

Delete template?

Save as template?