DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Use the procedure below.
Item Description Default Setting
LDAP Select whether or not to use
LDAP.
8-133
Off ×
* : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is changed.
Sys. Menu/Count.:a b
1 Report
2 Counter
*********************
3 System
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
1 Network Setting
2 I/F Block Set.
3 Security Level
[ Exit ]
Network Setting: a b
*********************
1 TCP/IP Settings
2 NetWare
3 AppleTalk
[ Exit ]
TCP/IP Settings: a b
2 IPv4 Setting
3 IPv6 Setting
*********************
4 Protocol Detail
[ Exit ]
Default Setting (System Menu)
1 In the Sys. Menu/Count. menu, press the or key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
Restarting the
System*
3 Press the or key to select [Network Setting].
4 Press the OK key. The Network Setting menu appears.
5 Press the or key to select [TCP/IP Settings].
6 Press the OK key. The TCP/IP Settings menu appears.
7 Press the or key to select [Protocol Detail].
8