DC 6130 / P / 6135 / 6230 / 6235 - TA Triumph-Adler GmbH

Applying Limit of Restriction
11-26
Management
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item Description
Immediately *
* The next job will be prohibited in sending or in storing in the box.
Use the procedure below to apply the restriction limit.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the
subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
Sys. Menu/Count.: a b
*********************
4 User/Job Account
5 User Property
6 Common Settings
[ Exit ]
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account:a b
1 User Login Set.
2 *********************
Job Account.Set.
3 Unknown ID Job
[ Exit ]
Job Account.Set.:a b
4 Each Job Account
5 Account. List
*********************
6 Default Setting
[ Exit ]
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the or key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
NOTE: The User/Job Account menu appears.Refer to
Character Entry Method on Appendix-5 for details on
entering characters.
3 The User/Job Account menu appears.
4 Press the or key to select [Job Account. Set.].
5 Press the OK key. The Job Account. Set. menu appears.