SIMATIC PCS 7 Process Control System - Siemens

Two Ethernet interfaces 10/100/1000 Mbit/s (RJ45) are integrated
in the SIMATIC PCS 7 AS RTX for plant bus communication
with SIMATIC PCS 7 subsystems such as operator system,
engineering system or maintenance station.
ET 200M, ET 200ISP and ET 200S I/O stations can be linked
over a PROFIBUS DP interface to a comprehensive range of lowcost
signal/function modules as well as intelligent field/process
devices on the PROFIBUS PA.
The SIMATIC PCS 7 AS RTX is configured using the central engineering
system of the SIMATIC PCS 7 process control system.
The engineering system also administers the AS Runtime licenses
of the SIMATIC PCS 7 AS RTX. The scope of delivery
of the SIMATIC PCS 7 AS RTX already includes an AS Runtime
license for 250 POs. This can be expanded by further AS Runtime
licenses for 100 POs. The process objects of additional
AS Runtime licenses are then added to process objects which
already exist.
■ Technical specifications
SIMATIC PCS 7 AS RTX
Design and equipment features
Design DIN rail or wall mounting;
horizontal (preferred) or vertical
Degree of protection to EN 60529 IP20
(front/rear)
CPU
• Processor Intel Pentium M 1.4 GHz
• Front Side Bus 400 MHz
• Second Level Cache 2 MB
Chipset Intel Alviso 910GML
Main memory 1 GB DDR2-SDRAM (SO-DIMM
modules)
Graphics
• Graphics controller Intel 2D/3D GMA900, integrated
in chipset
• Graphics memory Dynamic video memory 8 to
128 MB
• Resolutions/colors/frequencies
-CRT Up to 1600 x 1200 / 32 bit colors /
60 to 120 Hz
- DVI Up to 1600 x 1200 / 32 bit colors
Drives
• Flash drive For CompactFlash card, 2 GB
• CD-ROM / DVD-RW / diskette Connectable via USB (not
included in scope of delivery)
© Siemens AG 2008
■ Technical specifications
Automation systems
Microbox automation system
Interfaces
• PROFIBUS/MPI 12 Mbit/s (electrically isolated,
CP 5611-compatible), 9-contact
Sub-D socket
• Ethernet 2 x 10/100/1000 Mbit/s (RJ 45),
two independent controllers
•USB 4 x USB 2.0/high-speed
• Serial 1 x COM1 (V.24), 9-contact Sub-D
connector
• Parallel -
• Graphics connection 1 x DVI-I (DVI/VGA combined):
• DVI: digital
• VGA analog
• Keyboard/mouse Connectable via USB (not
included in scope of delivery)
LED displays • Power
• Watchdog
Operating system / basic software
Operating system Windows XP Embedded preinstalled
on CompactFlash card
(CF card) 2 GB, no activation
required
System-tested SIMATIC industrial WinAC RTX
software
DiagMonitor
Monitoring/diagnostics functions
Watchdog • Monitoring of program execution
• Restart can be parameterized
following faults
• Monitoring time adjustable in the
software
Temperature • Processor
• Motherboard
(via SIMATIC PC DiagMonitor and
SIMATIC PCS 7 Asset Management)
Operating hours counter (via SIMATIC PC DiagMonitor and
SIMATIC PCS 7 Asset Management)
Safety
Protection class Protection class I compliant with
IEC 61140
Safety directives EN 60950-1; UL 60950;
CAN/CSA-C22.2 No. 60950-1;
UL 508; CAN/CSA-C22.2 No. 142
or CAN/CSA-C22.2 No. 14-05
Noise level
Operation < 40 dB (A) to DIN 45635-1
Siemens ST PCS 7 · Update November 2008
10/5
10