SIMATIC PCS 7 Process Control System - Siemens

15
Update/upgrade packages
Software/licenses for system communication via
Industrial Ethernet
■ Overview
■ Selection and Ordering Data Order No.
With SIMATIC PCS 7, communications software and licenses of Communications software/licenses for SIMATIC PCS 7 V7.0
SIMATIC NET are used for the system communication via Industrial
Ethernet. Their version cycle is not usually synchronous with
SIMATIC NET S7-1613/2006
(V6.4) for Industrial Ethernet
6GK1 716-1CB64-3AA0
that of SIMATIC PCS 7.
S7 communications software for
Whereas SIMATIC PCS 7 V7.0 communicates with SIMATIC NET
products V6.4 (Edition 2006), the system components of
CP 1613,
runtime software, in 2 languages
(German, English), executes with
SIMATIC PCS 7 V6.x only work together with SIMATIC NET prod- Windows 2000 Professional/
ucts V6.3 (Edition 2005). Therefore the following ordering data 2000 Server/ XP Professional/
again shows a comparison of the two versions.
Server 2003, single license for
1 installation,
When upgrading from SIMATIC PCS 7 V6.x to V7.0, it must be software and electronic manual
observed that a separate upgrade from V6.3 (Edition 2005) to on CD-ROM, license key on dis-
V6.4 (Edition 2006) is only required for the S7-REDCONNECT kette
communications software. For the other products, the version
upgrade is implemented during the SIMATIC PCS 7 upgrade
SIMATIC NET S7-
REDCONNECT/2006 (V6.4)
6GK1 716-0HB64-3AA0
with the SIMATIC PCS 7 Upgrade Packages V6.x to V7.0.
Software for fail-safe S7 communication
over redundant networks,
for CP 1613, runtime software, in
2 languages (German, English),
executes with Windows
2000 Professional/ 2000 Server/
XP Professional/ Server 2003, single
license for 1 installation, software
and electronic manual on
CD-ROM, license key on diskette
SIMATIC NET S7-
REDCONNECT/2006 (V6.4)
Upgrade
Software for expansion of
S7-1613 to S7-REDCONNECT,
runtime software, in 2 languages
(German, English), executes with
Windows 2000 Professional/
2000 Server/ XP Professional/
Server 2003, single license for
1 installation,
software and electronic manual
on CD-ROM, license key on diskette
6GK1 716-0HB64-3AC0
Upgrade of S7-REDCONNECT communications software V6.3
(edition 2005) to V6.4 (edition 2006)
SIMATIC NET S7-REDCONNECT
Upgrade from V6.3 to V6.4
Software for upgrading
S7-REDCONNECT, runtime software,
2 languages (German, English),
executes with Windows
2000 Professional/ 2000 Server/
XP Professional/ Server 2003, single
license for 1 installation,
software and electronic manual
on CD-ROM, license key on diskette
BCE license
6GK1 716-0HB64-3AE0
PCS 7 BCE V7.0
Runtime license for plant bus
communication via standard network
card and Basic Communication
Ethernet; already integrated
in SIMATIC PCS 7 Industrial Workstations,
in 3 languages (German, English,
French), executes with Windows
XP Professional or Windows
Server 2003, floating license for
1user
Type of delivery: License key
disk, certificate of license, terms
and conditions
6ES7 650-1CD07-2YB5
15/4
Siemens ST PCS 7 · November 2007
© Siemens AG 2007