SIMATIC PCS 7 Process Control System - Siemens

Additional and expansion components
Memory modules for expanding
the main memory
• 512 MB memory expansion for
SIMATIC Rack PC 547B
(1 x 512 MB), DDR2-667
SDRAM
6ES7 648-2AF30-0HA0 B)
• 1 GB memory expansion for
SIMATIC Rack PC 547B
(2 x 512 MB),
DDR2-667 SDRAM,
kit for dual-channel technology
6ES7 648-2AF40-0HB0 B)
• 2 GB memory expansion for
SIMATIC Rack PC 547B
(2 x 1 GB), DDR2-667 SDRAM,
kit for dual-channel technology
SIMATIC PC keyboard
(USB connection)
6ES7 648-2AF50-0HB0 B)
• International key assignment
Tower kit for SIMATIC PCS 7
Industrial Workstations
based on Rack PC 547B and
IL 43
6ES7 648-0CB00-0YA0
• Tower kit for conversion of a
Rack PC into an industrial
Tower PC
3-m power cable for Rack PC
6ES7 648-1AA00-0XC0
1)
■ Selection and Ordering Data Order No.
• For Great Britain 6ES7 900-0BA00-0XA0
• For Switzerland 6ES7 900-0CA00-0XA0
•For USA 6ES7 900-0DA00-0XA0
•For Italy 6ES7 900-0EA00-0XA0
•For China
SIMATIC NET S7-REDCONNECT
Upgrade
For communication with faulttolerant
AS systems, see page
9/29
6ES7 900-0FA00-0XA0
B) Subject to export regulations: AL: N, ECCN: EAR99H
1) The PCS 7 systems are delivered as standard with a "European power
cable". The country-specific versions listed above are required for some
countries.
© Siemens AG 2007
System-neutral components
SIMATIC PCS 7 Industrial Workstation
Siemens ST PCS 7 · November 2007
Basic hardware
■ Accessories
Keyboards
The SIMATIC PCS 7 Industrial Workstations are delivered without
a keyboard. The SIMATIC PC keyboard with USB connection, for
example, is suitable for process operation with SIMATIC PCS 7.
The SIMATIC PC keyboard is a standard MF2 keyboard with
105 keys, without additional special functions. It combines the
convenience of an office keyboard with the EMC of an industrial
device. Standards/approvals: UL 1950, CSA C22.2 No. 950,
FCC Part 15, subpart B, class B, VDE-GS (EN 60950/ZHI/618),
CE, C-TICK-Mark (Australia).
Power supply cable for Rack PC
The SIMATIC PCS 7 systems are delivered as standard with a
"European power cable". This can be used in Germany, France,
Spain, Netherlands, Belgium, Sweden, Austria and Finland.
The country-specific versions listed in the Ordering data are required
for other countries. The following picture shows the appearance
of the power supply plugs:
Country-specific power supply cables for Rack PC
Tower Kit
A Tower Kit for converting a SIMATIC PCS 7 Industrial Workstation
of Rack PC design into an industrial Tower PC can be ordered
as an option. The Tower Kit is suitable for SIMATIC PCS 7
Industrial Workstations based on the Rack PC types 547B and
IL 43.
2/15
2