SIMATIC PCS 7 Process Control System - Siemens

■ Overview
The IM 153-2 High Feature interface module (electrical
PROFIBUS DP transmission) or IM 153-2 FO High Feature interface
module (optical PROFIBUS DP transmission) is required to
connect the ET 200M remote I/O station to the PROFIBUS DP
fieldbus. Depending on the fieldbus configuration (single/redundant),
the ET 200M remote I/O station can be connected via one
single or two redundant interface modules.
The IM 153-2 High Feature supports the following functions:
7 HART configuring of intelligent field devices
7 Configuration of ET 200M I/Os in RUN mode of the automation
system
7 Connection to redundant AS 412H / AS 414H / AS 417H automation
systems
7 Use of ET 200M function modules (controller and counter
modules)
7 Operation of up to 12 I/O modules per remote I/O station
7 Time stamping (SOE) with the safety-related SM 326F digital
input module (F-DI24)
7 Transmission of additional values with HART secondary variables
of the HART SM 331 and SM 332 analog modules (up to
4 per channel or up to 8 per module)
On the other hand, the fiber-optic (FO) version IM 153-2 FO High
Feature provides the following functions:
7 HART configuring of intelligent field devices
7 Configuration of ET 200M I/Os in RUN mode of the automation
system
7 Connection to redundant AS 412H, AS 414H and AS 417H
automation systems
7 Use of ET 200M function modules (controller and counter
modules)
7 Operation of up to 8 I/O modules per remote I/O station
Notes:
In order to use the hot swapping function, it is necessary to use the active
bus modules and the DIN rail for hot swapping (refer to page 11/12).
When using the IM 153-2 FO, additional plastic FOCs and an assembly
set for Simplex connectors are required (refer to page 9/40).
© Siemens AG 2007
Process I/O
ET 200M distributed I/O
B) Subject to export regulations: AL: N, ECCN: EAR99H
Siemens ST PCS 7 · November 2007
Interface modules
■ Selection and Ordering Data Order No.
IM 153-2 High Feature
Slave interface module for connection
of an ET 200M to
PROFIBUS DP, with time stamp
(accuracy 1 ms), support of
HART functionality, F modules,
FM modules, "Configuration in
RUN" function; also for use in
redundant systems
6ES7 153-2BA02-0XB0 B)
IM 153-2 FO High Feature
Slave interface module for connection
of an ET 200M to optical
PROFIBUS DP; support of HART
functionality, F modules, FM modules,
"Configuration in RUN" function;
also for use in redundant
systems
6ES7 153-2BB00-0XB0 B)
11/11
11