WAP-V6000 INSTRUCTION MANUAL - TEAC Europe GmbH
WAP-V6000 INSTRUCTION MANUAL - TEAC Europe GmbH
WAP-V6000 INSTRUCTION MANUAL - TEAC Europe GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HDD Installation, Configuration and File Management<br />
Hard Disk Drive Installation<br />
<strong>WAP</strong>-<strong>V6000</strong> supports 3.5” SATA HDD as internal storage. By installing the HDD<br />
inside, you can copy and delete media files via computer to local HDD and record<br />
streams to HDD.<br />
Attention: We recommend you to have a new HDD to install. You can chose to let<br />
<strong>WAP</strong>-<strong>V6000</strong> automatically format the HDD to EXT3 and erase your existing files.<br />
Follow the instructions below to set up HDD.<br />
1. Make sure <strong>WAP</strong>-<strong>V6000</strong> is turned off.<br />
2. Lay the unit upside-down on the working surface.<br />
Attention: to avoid scratches on the cover's top surface, lay the case cover<br />
upside-down on a soft cloth!<br />
3. Use a screw driver to unscrew the 4 screws at the bottom.<br />
4. Remove the top cover from bottom tray.<br />
18
Change language