WAP-V6000 INSTRUCTION MANUAL - TEAC Europe GmbH

Safety Information
ATTENTION: Failure to follow these safety instructions could result in fire, electric
shock, or other injury or damage.
● Read these instructions
● Keep these instructions
● Heed all Warnings
● Follow all instructions
● Do not use this apparatus near water.
● Clean only with dry cloth
● Do not install near any hear sources such as radiators, stoves, or other
apparatus (including amplifiers) that produce heart.
● Unplug this apparatus during lightning storms or when unused for long
periods of time.
ATTENTION: To reduce the risk of electronic shock, pull out the mains plug before
removing the cover!
ATTENTION: The device can display static images, which can cause “burn in” of
certain displays. Avoid leaving static images (such as photos or paused videos)
onscreen for long periods of time.
ATTENTION : This device should be used only indoors in well-ventilated areas. To
reduce the risk of fire, electric shock, or interference, do not expose this appliance to
rain, liquid, moisture, excessive hear, or naked flame.
Tip: please visit www.teac.de to check for new firmware for your WAP-V6000. New
firmware contains latest corrections and often it adds essential new features into
your device!
-- We do recommend, always to update for the latest firmware! --
TEAC is always active to offer you the best possible features for your WAP-V6000!
6