Xilinx UG230 Spartan-3E FPGA Starter Kit Board User Guide

Chapter 4: FPGA Configuration Options
To regenerate the programming file, double-click Generate Programming File, as
shown in Figure 4-12.
Generating the PROM File
UG230_c4_13_022706
Figure 4-12: Double-Click Generate Programming File
After generating the program file, double-click Generate PROM, ACE, or JTAG File
to launch the iMPACT software, as shown in Figure 4-13.
UG230_c4_14_022706
Figure 4-13: Double-Click Generate PROM, ACE, or JTAG File
After iMPACT starts, double-click PROM File Formatter, as shown in Figure 4-14.
34 www.xilinx.com Spartan-3E FPGA Starter Kit Board User Guide
UG230 (v1.2) January 20, 2011
R