SIMATIC Industrial Software - Leocom

■ Overview
STEP 7 basic software:
The standard tool for the SIMATIC S7, SIMATIC C7 and
SIMATIC WinAC automation systems.
Makes use of the full performance capabilities of the systems
User-friendly functions for all ph ases of an automation project:
- Configuring and parameterizing the hardware
- Definition of communication
- Programming
- Testing, commissioning and service
- Documentation, archiving
- Operating, diagnostics function
Components for connection of the PC to MPI and PROFIBUS
The PC modules described below support, in combination with
STEP 7, the connection of programming devices and
AT-compatible PCs or notebooks to PROFIBUS and the MPI of
SIMATIC S7.
PC adapter USB
For connecting a PC to the SIMATIC S7 automation system via
the USB interface
Can be connected to USB 1.1 and 2.0 interfaces
For use with SIMATIC S7-300 and S7-400
Supports routing
Automatic transmission rate and profile search
Significantly enhanced performance (up to 3 times faster than
the PC adapter via RS 232)
With firmware that can be upgr aded in the future, e.g., for
function expansion or error rectification
Can be used with Windows 2000, Windows XP Home and
Windows XP Professional
Scope of supply:
- PC adapter USB
- CD "SIMATIC Software PC Adapter USB" with software and
documentation
- USB cable, 5 m
- MPI cable, 0.3 m
SIMATIC Industrial Software
Standard tools
Siemens ST 70 · 2005
STEP 7
CP 5512
For PGs/PCs/notebooks with PCMCIA slot
PCMCIA card type II (Cardbus 32-bit)
Incl. adapter with 9-pin Sub D socket for connection to
PROFIBUS
CP 5611 or CP 5611-MPI
For PGs/PCs with a PCI slot
Short PCI card (32-bit)
CP 5611 MPI including MPI cable
Components for connecting the PC to Industrial Ethernet
The PC modules described below support, in combination with
the software STEP 7 and SOFTNET-PG (V6.0 or later) for
Industrial Ethernet, the connection of programming devices and
AT-compatible PCs or notebooks to Industrial Ethernet.
CP 1512
For PGs/PCs/notebooks with PCMCIA slot
PCMCIA card type II (Cardbus 32-bit); 10/100 Mbps
Incl. adapter with RJ45 socket for connection to Industrial
Ethernet
CP 1612
For PGs/PCs with a PCI slot
Short PCI card (32-bit); 10/100 Mbps
With RJ45 socket for connection to Industrial Ethernet
For technical details concerning versions and supported operating
systems, please refer to the catalog data for the respective
products.
For further information about online connection of PCs and
SIMATIC S7/C7 controllers, see "SIMATIC NET Communication
Systems" in the catalog IK PI or in the A&D Mall.
7/3
7