SIMATIC Industrial Software - Leocom
SIMATIC Industrial Software - Leocom
SIMATIC Industrial Software - Leocom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>SIMATIC</strong> <strong>Industrial</strong> <strong>Software</strong><br />
Engineering tools<br />
■ Technical specifications (continued) ■ Ordering data Order No.<br />
System requirements<br />
Operating system Windows 2000 Prof. with Service<br />
Pack 4 or<br />
Windows XP Prof. with Service<br />
Pack 1;<br />
PC administration privileges are<br />
required for installation<br />
PG/PC hardware Pentium processor with 800 MHz<br />
or more (1.2 GHz recommended)<br />
Recommended memory<br />
configuration on PG/PC<br />
Hard disk storage requirement<br />
in PG/PC<br />
At least 256 MB RAM<br />
(512 MB recommended)<br />
Approx. 50 MB<br />
Required software STEP 7 V5.2 Service Pack 1 or<br />
later including NCM<br />
<strong>SIMATIC</strong> NET IE SOFTNET-PG<br />
V6.2 or later<br />
PN OPC server V6.2 or later<br />
The following software must be<br />
installed prior to installation of<br />
iMap (included in delivery of<br />
iMap):<br />
MS Internet Explorer V6.0 or later<br />
Service Pack 1<br />
MS XML Parser V4.0 Service<br />
Pack 1<br />
Adobe Acrobat Reader V5.0<br />
Form supplied<br />
Languages English and German<br />
Single license Yes<br />
Upgrade license Yes, from V1.2 to V2.0<br />
Printed manuals Present in electronic form on CD<br />
Authorization/licenses<br />
Authorization Yes<br />
Single license Yes<br />
Upgrade license Yes<br />
<strong>Software</strong> update service Yes<br />
Unlock copy license No<br />
Siemens ST 70 · 2005<br />
<strong>SIMATIC</strong> iMap<br />
<strong>SIMATIC</strong> iMap V2.0<br />
Target system:<br />
CPU 317-2 PN/DP,<br />
<strong>SIMATIC</strong> WinAC PN,<br />
<strong>SIMATIC</strong> NET IE/PB Link,<br />
<strong>SIMATIC</strong> NET CP 343-1 PN,<br />
<strong>SIMATIC</strong> NET CP 443-1 Advanced,<br />
distributed I/O stations with<br />
separate CPU, PROFINET OPC<br />
server, <strong>SIMATIC</strong> ProTool/Pro<br />
Prerequisite:<br />
Windows 2000 Prof. SP4 or<br />
Windows XP Prof SP1; on PG<br />
or PC with Pentium processor,<br />
min. 500 MHz; STEP 7 V5.2 SP 1<br />
or later incl. NCM, <strong>SIMATIC</strong> NET<br />
IE SOFTNET PG V6.2 or newer,<br />
PN OPC server V6.2 or newer<br />
Delivery package:<br />
English, German,<br />
with electronic documentation<br />
Single license 6ES7 820-0CC03-0YX0<br />
<strong>Software</strong> update service 6ES7 820-0CC01-0YX2<br />
Upgrade to V2.0, single license 6ES7 820-0CC03-0YX4<br />
7/23<br />
7