SIMATIC Industrial Software - Leocom

■ Overview
■ Technical specifications
Data transmission rates
Interfaces
9.6 kbit/s to 12 Mbit/s
Connection to PROFIBUS 2 x duplex socket (FO)
Connection to PG/PC PCI (32 bit)
External power supply (optical) Low voltage socket
through standard external power
supply
3.5 mm/1.3 mm
Supply voltage from PCI
Current consumption
5 V DC +/- 5 %
12 V DC +/- 5 %
From 5 V DC 1.4 A
From 12 V DC 0.3 A
Power loss 7 W
Supply voltage (optional) 9 to 12 V DC
Current consumption 0.4 A
Power loss
Perm. environmental conditions
Operating temperature
3.6 to 4.8 W
- Without fan +5°C to +40°C
- With fan (air flow 0.5 m/s) +5°C to +60°C
Transport/storage temperature -40 °C to +70 °C
Relative humidity
Design
Max. 95% at +25 °C
Module format PCI card
Dimensions (W x H) in mm 107 x 168
Weight Approx. 250 g
Space required 1 x PCI slot (32 bits; 5 V)
DP master DP V0, DP V1, DP V2
Programming devices
Accessories
Siemens ST 70 · 2005
CP 5613 FO
PCI card with microprocessor for system connection for PCs
and SIMATIC PGs/PC to the optical PROFIBUS at up to
12 Mbit/s
Integral fiber-optic interface for direct FO connection
Communication services:
- PROFIBUS DP masters according to IEC 61158/EN 50170
- PG/OP communication with STEP 5 and STEP 7
- S7 communication
- S5-compatible communication (SEND/RECEIVE) based on
the FDL interface
- PROFIBUS FMS acc. to IEC 61158/EN 50170
Comprehensive diagnostics po ssibilities for installation,
start-up and operation of the module
High performance over direct dual-port RAM access
Event and filter mechanisms to reduce the loading on the host
CPU
Multi-protocol mode and paralle l operation of up to 4 CPs
Implementation in Motion Cont rol applications is possible
because a constant bus cycle time is supported
The appropriate OPC server and configuration tools are included
in the scope of supply of the respective communication
software
Performance data:
Single protocol operation
Number of connectable
Max. 122
DP slaves
Number of parallel
Max. 120
FDL tasks to be processed
Number of PG/OP and
Max. 50
S7 connections
1)
Number of FMS connections Max. 40 2)
1) For Credit = 1; PDU size ≤ 480 byte
2) For Credit = 1
8/13
8