SIMATIC Industrial Software - Leocom

11
Overview
PROFINET
CP 343-1 IT
■ Overview
CP 443-1 Advanced
■ Overview
Connection of SIMATIC S7-400 to Industrial Ethernet
- 10/100 Mbit/s full/half duplex connection with autosensing
- Connection via RJ45
- Multi-protocol operation for ISO, TCP/IP and UDP
- Adjustable Keep Alive function
11/14
Siemens ST 70 · 2005
Connection of SIMATIC S7-300 to Industrial Ethernet
- 10/100 Mbit/s full/half duplex connection with autosensing
- Connection via RJ45
- Multi-protocol operation for TCP/IP and UDP
- Adjustable Keep Alive function
Communication services:
- TCP/IP und UDP transport protocol:
Multicast for UDP
- Programming device/operator panel communication:
Network-wide PG/OP communication through S7 Routing
- S7 communication
- S5-compatible communication
- IT communication:
HTTP communication supports access to process data
through Web browsers;
FTP communication supports program-controlled FTP client
communication,
Access to data blocks through FTP server,
Data handling for own file system through FTP,
E-mail
IP address assignment via DHCP, simple PC tool or via
program block per HMI (in exclusive server mode)
IP address-based access protection
Remote programming and initial startup via the network
Clock synchronization of the CPU via NTP or SIMATIC
procedure
Integration into network management systems through the
support of SNMP V1 MIB-II
Communication services:
- PROFINET IO Controller
- PROFINET CBA
- ISO, TCP/IP and UDP transport protocols:
Multicast for UDP
- Programming device/operator panel communication:
Cross-network by means of S7 routing
- S7 communication
- S5-compatible communication
- IT communication:
HTTP communication supports access to process data
through Web browsers;
FTP communication supports program-controlled FTP client
communication,
Access to data blocks through FTP server,
Data handling for own file system through FTP, E-mail
IP address assignment via DHCP, si mple PC tool or via the user
program (e.g. HMI)
Access protection by means of configurable access list
Single-width module wi th integrated 4-port switch saves space
in the rack and control cabinet. Thanks to the integrated autocrossing
function, the CP 443-1 Advanced is very well suited
for establishing small local networks.
Module replacement without programming device; all information
is stored on the C-PLUG (also file system for IT functions).
Extensive diagnostic function s for all modules in the rack