SIMATIC Industrial Software - Leocom
SIMATIC Industrial Software - Leocom
SIMATIC Industrial Software - Leocom
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
■ Overview<br />
Component based Automation<br />
Controller / Distributed I/O for <strong>Industrial</strong> Ethernet<br />
■ Technical specifications<br />
See section 4.<br />
Siemens ST 70 · 2005<br />
CP 343-1 PN<br />
■ Ordering data Order No.<br />
Communications processor<br />
CP 343-1 PN<br />
For connecting <strong>SIMATIC</strong> S7-300<br />
to <strong>Industrial</strong> Ethernet with PROFI-<br />
NET function, TCP/IP, S7 communication,<br />
FETCH/WRITE,<br />
SEND/RECEIVE, with/without RFC<br />
1006, 10/100 Mbit/s with electronic<br />
manual on CD-ROM<br />
6GK7 343-1HX00-0XE0<br />
NCM S7 configuration software Supplied with STEP 7<br />
for <strong>Industrial</strong> Ethernet<br />
NCM S7 manual<br />
for <strong>Industrial</strong> Ethernet<br />
Paper version<br />
Version V5.1 SP 2 and higher<br />
The CP 343-1 PN enables conn ection of <strong>SIMATIC</strong> S7-300 to<br />
<strong>Industrial</strong> Ethernet<br />
for V5.x (STEP 7 V5.x)<br />
German 6GK7 080-1AA03-8AA0<br />
- 10/100 Mbit/s full/half duplex connection with autosensing<br />
for automatic switching<br />
- Universal connection options for ITP, RJ45 and AUI<br />
English<br />
French<br />
6GK7 080-1AA03-8BA0<br />
6GK7 080-1AA03-8CA0<br />
- Adjustable Keep Alive function<br />
Spanish 6GK7 080-1AA03-8DA0<br />
- TCP/UDP transport protocol<br />
Italian 6GK7 080-1AA03-8EA0<br />
PROFINET communications standards: PROFINET, the Ethernet-based<br />
communications standard, defines an engineering<br />
model for distributed automation solutions and a model for<br />
<strong>Software</strong> iMap V2.0<br />
For configuring<br />
system-wide communication through PROFIBUS and <strong>Industrial</strong><br />
Ethernet. This standard is implemented by Siemens as<br />
Component based Automation.<br />
<strong>SIMATIC</strong> WinAC PN,<br />
<strong>SIMATIC</strong> NET IE/PB Link,<br />
<strong>SIMATIC</strong> NET CP 343-1 PN,<br />
Additional communication services:<br />
- PG/OP communication<br />
- S7 communication<br />
- S5-compatible communication<br />
Multicast at UDP<br />
Remote programming and commissioning through the<br />
<strong>SIMATIC</strong> NET CP 443-1 Advanced,<br />
distributed I/O stations with a<br />
separate CPU, PN OPC server,<br />
<strong>SIMATIC</strong> ProTool/Pro<br />
Requirement:<br />
Windows 2000 SP4 or<br />
Windows XP Prof. SP1;<br />
network<br />
on programming devices or PC<br />
with Pentium processor, 500 MHz<br />
or faster; STEP 7 V5.2 SP 1<br />
incl. NCM, <strong>SIMATIC</strong> NET IE<br />
SOFTNET-PG V6.2 and higher,<br />
PN OPC server V6.2 and higher<br />
Type of supply:<br />
German, English, with electronic<br />
documentation<br />
Single license 6ES7 820-0CC03-0YX0<br />
<strong>Software</strong> update service 6ES7 820-0CC01-0YX2<br />
Upgrade iMap to V2.0<br />
single license<br />
6ES7 820-0CC03-0YX4<br />
10/9<br />
10
Change language