SIMATIC Industrial Software - Leocom

■ Overview
■ Technical specifications
Data transmission rate
Interfaces
9.6 kbit/s to 12 Mbit/s
Connection to PROFIBUS 9-pin Sub-D connector
Connection to PG/PC PC Card Type II (CardBus 32 bit);
Supply voltage 3.0 V to 3.6 V DC
Current consumption Typ. 520 mA
Power loss
Perm. environmental conditions
1.8 W
Operating temperature +5°C to +45°C
Transport/storage temperature -20 °C to +60 °C
Relative humidity 95% at +25 °C
Programming devices
Accessories
Siemens ST 70 · 2005
CP 5512
For connecting programming devices, PCs and notebook
computers with a PC slot (CardBus 32-bit) to PROFIBUS and
the MPI of SIMATIC S7
Communication services:
- PROFIBUS DP master Class 1 including acyclic DP
expansions with SOFTNET-DP
- PROFIBUS DP master Class 2 including acyclic DP
expansions with SOFTNET-DP
- PROFIBUS DP slave with SOFTNET-DP slave
- PG/OP communication
- S7 communication with SOFTNET-S7
- S5-compatible communication (SEND/RECEIVE based on
the FDL interface) with SOFTNET-DP or SOFTNET-S7
PC card Type II (CardBus 32-bit); for programming device/PC
with PC card slot and notebook computers
Can be used with:
- STEP 7 and NCM PC; (ProTool ® , Micro/Win, ProTool/Pro ® ,
SIMATIC PDM for PG/OP communication available soon)
- SOFTNET-S7 (for S7 communication)
- SOFTNET-DP, SOFTNET-DP slave (for DP)
The appropriate OPC servers ar e included in the scope of
supply of the respective communication software
Design
Module format PC card Typ II for CardBus
(32 bit)
Dimensions (W x H x D) in mm 54 x 85 x 5
Weight
- Without adapter Approx. 30 g
- With adapter Approx. 130 g
Space required 1 x PC Card slot Type II (CardBus
32 bit)
DP master DP V0, DP V1 (with SOFTNET DP)
DP slave DP V0, DP V1
(with SOFTNET DP slave)
8/19
8