Programmer's Manual TSP700/800 Series - i-POS.nl BV
Programmer's Manual TSP700/800 Series - i-POS.nl BV
Programmer's Manual TSP700/800 Series - i-POS.nl BV
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FUNCTION<br />
Define bar code format<br />
CODE “P B n1n2 ; x1x2x3x4 ,<br />
y1y2y3y4 , w , b , m ,<br />
h1h2h3h4”<br />
HEX 1B 50 42 n1n2 3B x1x2x3x4 2C<br />
y1y2y3y4 2C w 2C b 2C m 2C<br />
h1h2h3h4 0A 00<br />
REMARKS This command defines start position and type of bar code string.<br />
n1n2 : Bar code string number (00 to 31)<br />
x1x2x3x4 : Print start position in the X direction (0000 to 1040 ×<br />
0.1 mm)<br />
y1y2y3y4 : Print start position in the Y direction (0000 to 2000 ×<br />
0.1 mm)<br />
w : Mode (See Appendix for details)<br />
b : Bar code type (1 to 9)<br />
1: CODE 39<br />
2: INTERLEAVED 2 OF 5 (ITF)<br />
3: CODE 93<br />
4: UPC-A<br />
5: JAN/EAN-8<br />
6: JAN/EAN-13<br />
7: CODE 128<br />
8: NW-7<br />
9: UPC-E<br />
m : Bar code rotation direction (0 to 3) (clockwise)<br />
0 1 2 3<br />
0 degree 90 degrees 180 degrees 270 degrees<br />
h1h2h3h4 : Bar code height (0000 to 1999 × 0.1 mm)<br />
Note: a) When a bar code is rotated, its dimensions may not<br />
conform to ANSI specifications. Make sure that the<br />
printed bar code is compatible with the scanner or<br />
scanners to be utilized.<br />
b) Up to 32 bar codes can be defined.<br />
c) If “;” or “,” is missing, printer goes into an error<br />
condition.<br />
– 51 –<br />
PAGE MODE